| 基于数据直接传递的摆线轮参数化设计 |
| |
| 引用本文： | 林昌华,杨岩.基于数据直接传递的摆线轮参数化设计[J].机械传动,2009,33(3). |
| |
| 作者姓名： | 林昌华 杨岩 |
| |
| 作者单位： | 重庆理工大学,汽车学院,重庆,400050 |
| |
| 摘 要： | 为了解决AutoLISP参数化设计产生的摆线轮二维廓形在UG环境下快速生成实体模型的问题,提出了基于数据直接传递的建模方法,利用UG建模模块中样条曲线的文件功能读入AutoLISP函数运行得到的数据,在UG环境中直接生成二维廓形,并通过拉伸和其他特征操作快速得到摆线轮的三维实体模型,从时效上解决了图形数据从一种环境向另一种环境中的转换.
|
| 关 键 词： | 数据直接传递 摆线轮 参数化设计 |
The Parametric Design of Cycloid-gear based on Direct Data Transfer |
| |
| Lin Changhua,Yang Yan.The Parametric Design of Cycloid-gear based on Direct Data Transfer[J].Journal of Mechanical Transmission,2009,33(3). |
| |
| Authors: | Lin Changhua Yang Yan |
| |
| Abstract: | Based on direct data transfer,a new modeling method in UG is presented.The fast modeling of cycloid-gear whose 2D profile data generated in AutoLISP is achieved by this method.Using the file function of spline curve in UG modeling module,the data calculated by AutoLISP is loaded in UG.The 2D profile of cycloid-gear is directly obtained,and then,the 3D model is constructed by extruded body and other functions.The problem of data transferred in different software is successfully solved by this method. |
| |
| Keywords: | Direct data transfer Cycloid-gear Parametric design |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
