| 双带式金属带材快速成形过程的流动场与温度场三维耦合模拟 |
| |
| 引用本文： | 刘艳,周成,谢建新.双带式金属带材快速成形过程的流动场与温度场三维耦合模拟[J].塑性工程学报,2008,15(3):174-179. |
| |
| 作者姓名： | 刘艳 周成 谢建新 |
| |
| 作者单位： | 1. 北京科技大学,材料学院,北京,100083;辽宁工学院,锦州,121001
2. 北京科技大学,材料学院,北京,100083 |
| |
| 基金项目： | 国家自然科学基金资助项目 |
| |
| 摘 要： | 文章采用有限差分方法计算双带式金属带材快速凝固成形过程的流热偶合问题,模拟了单孔喷嘴浇注时铝液的流动场及其温度分布,计算结果得出了不同喷嘴尺寸、冷却带速度和浇注速度下铝液的流动情况、凝固前沿形状和液相区长度,找出了工艺参数之间的合理关系,为进一步实验研究提供了理论依据。
|
| 关 键 词： | 快速凝固 薄带 双带法 数值模拟 |
3D simulation coupled the flow field and temperature field for thin metal ribbon formed by twin-belt rapid solidification |
| |
| Abstract: | The paper coupled the flow field and the temperature field with the method of finite difference during the thin metal ribbon formed by twin strips rapid solidification.The flow field and the temperature distribution are simulated when the aluminum fluid is poured on the twin strips from one nozzle.The flow of metal aluminum,the front shape of solidification and the length of liquid phase zone are found from the calculating result in the different conditions of nozzle size,the cooling velocity and the casting velocity,therefore,the theoretical rule can be provided for the further experimental research. |
| |
| Keywords: | rapid solidification thin ribbon twin strip method numerical simulation |
| 本文献已被 维普 万方数据 等数据库收录！ |
|
