| 六极永磁式潜油电机技术问题及CAD软件开发 |
| |
| 引用本文： | 潘雅滨,温嘉斌,徐永明.六极永磁式潜油电机技术问题及CAD软件开发[J].防爆电机,2011,46(5):10-12,19. |
| |
| 作者姓名： | 潘雅滨 温嘉斌 徐永明 |
| |
| 作者单位： | 哈尔滨理工大学,黑龙江哈尔滨,150080 |
| |
| 基金项目： | 2009年度黑龙江省教育厅科学技术研究项目 |
| |
| 摘 要： | 结合永磁同步电机设计原理,对六极永磁式潜油电机重要技术问题进行了分析.根据潜油电机特殊的分段结构,分别对端部漏抗的计算和斜极方法进行了研究,提出永磁式潜油电机转子倒装的分段斜极式方法并开发了CAD软件.通过建立六极永磁式潜油电机有限元模型,对齿槽定位力矩进行分析,验证该方法对降低电机齿槽定位力矩起到了一定的作用.
|
| 关 键 词： | 潜油电机 CAD 齿槽定位力矩 |
Technical Problems of Six-Pole PM Submersible Motor and Its CAD Software Development |
| |
| Pan Yabin,Wen Jiabin,Xu Yongming.Technical Problems of Six-Pole PM Submersible Motor and Its CAD Software Development[J].Explosion-proof Electric Machine,2011,46(5):10-12,19. |
| |
| Authors: | Pan Yabin Wen Jiabin Xu Yongming |
| |
| Affiliation: | Pan Yabin,Wen Jiabin,and Xu Yongming |
| |
| Abstract: | Based on the principle of designing PM synchronous motor,this paper analyzes the key technical problems of six-pole PM submersible motor.Aiming at the special segmented structure of submersible motor,the calculation of end leakage reactance and the skewed pole method are respectively investigated.The segmented skewed-pole method of rotor reverse installation is presented and the CAD software is developed.Through establishing finite-element analysis model of the six-pole PM submersible motor,the cogging torque has been analyzed.The results validate that this method has a positive effect to reduce the cogging torque of the motor. |
| |
| Keywords: | Submersible motor CAD cogging torque |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
