| 吹塑级热塑性聚酯弹性体(TPEE)的研制 |
| |
| 引用本文： | 张志平,彭树清,文彦飞,李谦,白峰. 吹塑级热塑性聚酯弹性体(TPEE)的研制[J]. 塑料工业, 2000, 28(2): 51-52 |
| |
| 作者姓名： | 张志平 彭树清 文彦飞 李谦 白峰 |
| |
| 作者单位： | 晨光化工研究院,成都,610041 |
| |
| 摘 要： | 采用在ＴＰＥＥ高分子链上引入特殊链段和聚全物反应挤出技术化学扩链的方法制备高熔体粘度、高熔体强度的ＴＰＥＥ树脂，其熔体流动速率≤２ｇ／１０ｍｉｎ，熔体强度指数≤３，满足吹塑加工工艺对ＴＰＥＥ熔体性质要求，且ＴＰＥＥ树脂熔合性能优异，生产工艺稳定。ＴＰＥＥ可吹塑加工各种制件。
|
| 关 键 词： | TPEE 吹塑成型 热塑性 聚酯弹性体 |
Preparation of Blow Molding Grade TPEE |
| |
| Zhang Zhiping,Peng Shuqing,Wen Yanfei,Li Qian,Bai Feng. Preparation of Blow Molding Grade TPEE[J]. China Plastics Industry, 2000, 28(2): 51-52 |
| |
| Authors: | Zhang Zhiping Peng Shuqing Wen Yanfei Li Qian Bai Feng |
| |
| Affiliation: | Chenguang Research Institute of Chemical Industry |
| |
| Abstract: | Thermoplastic polyester ether elastomer (TPEE)with high melt strength and high melt viscosity was prepared by means of blocking special segment into the chain of TPEE and extending the molecular chain by polymer reaction extrusion.When the melt flow rate of the TPEE was less than 2g/10min and melt strength index was less than 3,the TPEE could be procesed easily by means of extrusion blowing molding,having excellent physical properties and being suitable for the application to many fields. |
| |
| Keywords: | TPEE Blow Molding |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
