| 摩托车尾罩注塑模具设计 |
| |
| 引用本文： | 陈元芳,黄虹,陈世平.摩托车尾罩注塑模具设计[J].工程塑料应用,2004,32(1):49-52. |
| |
| 作者姓名： | 陈元芳 黄虹 陈世平 |
| |
| 作者单位： | 重庆工学院材料系,重庆,400050;重庆工学院材料系,重庆,400050;重庆工学院材料系,重庆,400050 |
| |
| 摘 要： | 分析了摩托车尾罩的结构特点，介绍了该塑料件的注塑模具结构，以及该模具设计中浇注系统设计时面积比和流动比的校核方法。还介绍了此模具抽芯机构及复位机构的结构特点，以及在进行冷却系统设计时确定冷却水管数目的详细计算过程及模具中部分零件的材料选用，
|
| 关 键 词： | 摩托车尾罩 注塑模具 浇注系统 抽芯机构 复位机构 |
| 修稿时间： | 2003年9月9日 |
DESIGN OF THE INJECTION MOULD FOR THE MOTORCYCLE TAIL CAP |
| |
| Chen Yuanfang,Huang Hong,Chen Shiping.DESIGN OF THE INJECTION MOULD FOR THE MOTORCYCLE TAIL CAP[J].Engineering Plastics Application,2004,32(1):49-52. |
| |
| Authors: | Chen Yuanfang Huang Hong Chen Shiping |
| |
| Abstract: | The structure characteristics of the plastic part is analyzed, the structure of the injection mould is introduced, as well as the area ratio and liquid ratio calculate method in the pouring system of the mould design. The structure of pulling mechanism and resetting mechanism of the injection mould is also introduced as well as the determination of the quantity of cool water pipe and the material selection for the partial parts in the design of the cooling system. |
| |
| Keywords: | motorcycle Uul cap injection mould pouring system pulling mechanism resetting mechanism |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
