| 基于VC环境下对单个齿距偏差和齿距累积总偏差实验的数据处理 |
| |
| 引用本文： | 岳奎. 基于VC环境下对单个齿距偏差和齿距累积总偏差实验的数据处理[J]. 组合机床与自动化加工技术, 2006, 0(8): 91-93 |
| |
| 作者姓名： | 岳奎 |
| |
| 作者单位： | 合肥工业大学,机械与汽车工程学院,合肥,230009 |
| |
| 摘 要： | 文章介绍了单个齿距偏差和齿距累积总偏差的测量原理，同时也介绍了相对法的测量方法。详细介绍了为了实现实验数据的自动处理，在VC环境下编程的思路。程序界面直接显示出计算法的表格和图解法的图形，并将两参数的结果显示出来。经过大量的测试，结果表明该程序的算法是正确，操作简单、方便。
|
| 关 键 词： | 齿轮 单个齿距偏差 齿距累积总偏差 |
| 文章编号： | 1001-2265(2006)08-0091-03 |
| 收稿时间： | 2006-02-28 |
| 修稿时间： | 2006-02-28 |
Date Processing of Individual Circular Pitch Error and Total Cumulative Pitch Error Based on VC Condition |
| |
| YUE Kui. Date Processing of Individual Circular Pitch Error and Total Cumulative Pitch Error Based on VC Condition[J]. Modular Machine Tool & Automatic Manufacturing Technique, 2006, 0(8): 91-93 |
| |
| Authors: | YUE Kui |
| |
| Affiliation: | School of mechanical and Automobile Engineering, Hefei University of Technology, Hefei 230009, China |
| |
| Abstract: | This paper introduces a principle of how to measure individual circular pitch error and total cumulative pitch error, at the same time comparative method is put forward. A programming approach based on VC condition about how to calculate the two parameters is introduced in detail. The interface of the program can show the table and the diagrammatic view and the results directly. A large numbers of tests be passed through, the testing results show that the algorithm is correct and the operation is easy and convenient. |
| |
| Keywords: | gear individual circular pitch error total cumulative pitch error |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
