| 气瓶旋压成形技术 |
| |
| 引用本文： | 梁佰祥,杨明辉,阳意慧,夏琴香.气瓶旋压成形技术[J].机电工程技术,2004,33(10):12-14. |
| |
| 作者姓名： | 梁佰祥 杨明辉 阳意慧 夏琴香 |
| |
| 作者单位： | 华南理工大学机械工程学院,广东,广州,510640 |
| |
| 基金项目： | 华南理工大学高水平建设苗子项目(73056060) |
| |
| 摘 要： | 与冲压、焊接结构的气瓶相比,旋压气瓶从根本上消除了与焊缝有关的不连续、强度降低、脆裂和拉应力集中等缺陷,故此,旋压气瓶的气密性和耐压性能有了大幅提高。本文重点阐述了钢质气瓶、铝合金气瓶的旋压成形工艺特点及其成形工艺规范。
|
| 关 键 词： | 旋压 钢质气瓶 铝合金气瓶 |
| 文章编号： | 1009-9492(2004)10-0012-02 |
| 修稿时间： | 2004年3月5日 |
Spinning Technology for Gas Bottle |
| |
| Liang Baixiang,Yang Minghui,Yang Yihui,Xia Qinxiang.Spinning Technology for Gas Bottle[J].Mechanical & Electrical Engineering Technology,2004,33(10):12-14. |
| |
| Authors: | Liang Baixiang Yang Minghui Yang Yihui Xia Qinxiang |
| |
| Abstract: | Compared with stamping and welding gas bottles, disadvantages, such as discontinuity, strength reduction, brittle fracture and tensile stress concentration relevant to welding are completely eliminated by spinning. Therefore, the air tightness and pressure resistance of spinning gas bottle are improved greatly. Features and process criterion of spinning for steel and aluminum alloy gas bottle are mainly presented in this paper. |
| |
| Keywords: | Spinning Steel gas bottle Aluminum alloy gas bottle |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
