首页 | 本学科首页   官方微博 | 高级检索  
     

Effect of interlayer anions on chromium removal using Mg–Al layered double hydroxides:Kinetic,equilibrium and thermodynamic studies
引用本文:Mohamed Khitous,Zineb Salem,Djamila Halliche. Effect of interlayer anions on chromium removal using Mg–Al layered double hydroxides:Kinetic,equilibrium and thermodynamic studies[J]. 中国化学工程学报, 2016, 24(4): 433-445. DOI: 10.1016/j.cjche.2015.11.018
作者姓名:Mohamed Khitous  Zineb Salem  Djamila Halliche
作者单位:1.Laboratory of Industrial Process and Engineering LSGPI, Faculty of Mechanical and Process Engineering, University of Sciences and Technology, Houari Boumediene, BP 32 El-Allia, Bab Ezzouar, Algiers 16111, Algeria;2.Laboratory of Natural Gas Chemistry, Institute of Chemistry, University of Sciences and Technology, Houari Boumediene, BP 32 El-Allia, Bab Ezzouar, Algiers 16111, Algeria
基金项目:financially supported by both the department of Process Engineering and Chemistry of USTHB(Algiers)
摘    要:The influence of interlayer anions such as NO3-, SO42-and Cl-on Mg–Al hydrotalcites for Cr(VI) removal from aqueous solution was studied. The structure of the prepared LDHs was characterized by XRD, SEM, FTIR, TGA, BET surface area and p Hzpc. The sorbent ability and sorption mechanisms were also investigated. The LDHs exhibit high removal for Cr(VI), and the sorbed amount depends on the nature of interlayer anion, which decreased in the following order: NO3-N Cl-N SO42-. Nitrate-containing LDH reached a Cr(VI) sorption equilibrium within only 30 min. The effects of operating conditions, including initial concentration, solution p H, agitation time and sorbent amount have been studied in batch mode. The optimum conditions were observed at an initial concentration of 100 mg·L-1, p H = 6, agitation time of 60 min and a sorbent dose of 2 g·L-1. The equilibrium data were fitted to the Langmuir, Freundlich and Dubinin–Radushkevich isotherm models. The Langmuir model was found to sufficiently describe the sorption process, offering a maximum sorption capacity of 71.91 mg·g-1. The sorption kinetic follows pseudo-second-order reaction with high accuracy. Thermodynamic parameters suggested that the sorption process is spontaneous and endothermic in nature.

关 键 词:Hydrotalcite  Cr(VI)  Sorption  Layered double hydroxide  Kinetic  
收稿时间:2015-02-05

Effect of interlayer anions on chromium removal using Mg-Al layered double hydroxides: Kinetic,equilibrium and thermodynamic studies
Mohamed Khitous,Zineb Salem,Djamila Halliche. Effect of interlayer anions on chromium removal using Mg-Al layered double hydroxides: Kinetic,equilibrium and thermodynamic studies[J]. Chinese Journal of Chemical Engineering, 2016, 24(4): 433-445. DOI: 10.1016/j.cjche.2015.11.018
Authors:Mohamed Khitous  Zineb Salem  Djamila Halliche
Affiliation:1.Laboratory of Industrial Process and Engineering LSGPI, Faculty of Mechanical and Process Engineering, University of Sciences and Technology, Houari Boumediene, BP 32 El-Allia, Bab Ezzouar, Algiers 16111, Algeria;2.Laboratory of Natural Gas Chemistry, Institute of Chemistry, University of Sciences and Technology, Houari Boumediene, BP 32 El-Allia, Bab Ezzouar, Algiers 16111, Algeria
Abstract:The influence of interlayer anions such as NO3-, SO42- and Cl- on Mg-Al hydrotalcites for Cr(VI) removal from aqueous solution was studied. The structure of the prepared LDHswas characterized by XRD, SEM, FTIR, TGA, BET surface area and pHzpc. The sorbent ability and sorption mechanisms were also investigated. The LDHs exhibit high removal for Cr(VI), and the sorbed amount depends on the nature of interlayer anion, which decreased in the following order: NO3- > Cl- > SO42-. Nitrate-containing LDH reached a Cr(VI) sorption equilibrium within only 30 min. The effects of operating conditions, including initial concentration, solution pH, agitation time and sorbent amount have been studied in batch mode. The optimum conditions were observed at an initial concentration of 100 mg·L-1, pH=6, agitation timeof 60 min and a sorbent dose of 2 g·L-1. The equilibriumdatawere fitted to the Langmuir, Freundlich and Dubinin-Radushkevich isothermmodels. The Langmuir modelwas found to sufficiently describe the sorption process, offering a maximum sorption capacity of 71.91 mg·g-1. The sorption kinetic follows pseudo-second-order reaction with high accuracy. Thermodynamic parameters suggested that the sorption process is spontaneous and endothermic in nature.
Keywords:Hydrotalcite  Cr(VI) Sorption  Layered double hydroxide  Kinetic
本文献已被 CNKI 万方数据 等数据库收录!
点击此处可从《中国化学工程学报》浏览原始摘要信息
点击此处可从《中国化学工程学报》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号