| 团簇对粉末热挤压铝基复合材料力学性能的影响 |
| |
| 引用本文： | 马国俊,丁雨田,金培鹏,王冬强.团簇对粉末热挤压铝基复合材料力学性能的影响[J].材料科学与工艺,2015,23(4):64-69. |
| |
| 作者姓名： | 马国俊 丁雨田 金培鹏 王冬强 |
| |
| 作者单位： | 1. 省部共建有色金属先进加工与再利用国家重点实验室 兰州理工大学，兰州730050; 青海大学 金属材料研究所，西宁810016;2. 省部共建有色金属先进加工与再利用国家重点实验室 兰州理工大学,兰州,730050;3. 青海大学 金属材料研究所,西宁,810016 |
| |
| 基金项目： | 国家重点基础研究发展计划项目(2011CB612200). |
| |
| 摘 要： | 为明确晶须团簇行为对材料力学性能的影响,采用粉末热挤压法制备了硼酸镁晶须增强铝基复合材料,对不同含量的晶须增强铝基复合材料进行了力学性能测试,并基于载荷传递模式提出相应的模型对材料强度进行预测.结果表明:随着硼酸镁晶须含量的增加,团簇加剧;当晶须体积分数大于10%时,材料力学性能降低;提出的模型考虑了团簇因素,成功预测了复合材料的实验强度.
|
| 关 键 词： | 铝基复合材料 硼酸镁晶须 热挤压 团簇 力学性能 |
| 收稿时间： | 2014/2/13 0:00:00 |
Effect of clustering on the mechanical properties of whisker reinforced Al matrix composites by hot extrusion of powder |
| |
| MA Guojun,DING Yutian,JIN Peipeng and WANG Dongqiang.Effect of clustering on the mechanical properties of whisker reinforced Al matrix composites by hot extrusion of powder[J].Materials Science and Technology,2015,23(4):64-69. |
| |
| Authors: | MA Guojun DING Yutian JIN Peipeng and WANG Dongqiang |
| |
| Affiliation: | State Key Laboratory of Advanced Processing and Recycling of Non-ferrous Metals Lanzhou University of Technology, Lanzhou 730050, China;School of Mechanical Engineering, Qinghai University, Xining 810016, China,State Key Laboratory of Advanced Processing and Recycling of Non-ferrous Metals Lanzhou University of Technology, Lanzhou 730050, China,School of Mechanical Engineering, Qinghai University, Xining 810016, China and State Key Laboratory of Advanced Processing and Recycling of Non-ferrous Metals Lanzhou University of Technology, Lanzhou 730050, China |
| |
| Abstract: | Mg2B2O5 whisker reinforced Al matrix composites were fabricated using powder metallurgy route, and the effects of clustering on mechanical properties of the composites were investigated. The mechanical properties of composites reinforced with different volume fractions of whiskers were measured, and a model based on the loading transfer mode was proposed to predict the strength of materials. The results showed that the aggregation of whiskers were apparent with increasing whisker content, and the mechanical properties (tensile or yield strength) decreasewhen the content of whisker was higher than 10vol.%. Considering the aggregation effect, the proposed model could well predict the experimentally observed strength of the composites. |
| |
| Keywords: | Al matrix composites Mg2B2O5 whisker hot extrusion clustering mechanical properties |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
| 点击此处可从《材料科学与工艺》浏览原始摘要信息 |
|
点击此处可从《材料科学与工艺》下载全文 |
|
