Electrooxidation of methanol on platinum bonded to the solid polymer electrolyte,Nafion

The electrooxidation of methanol was enhanced on PtSn-SPE, PtRu-SPE and PtIr-SPE in sulfuric acid solution, when compared with the activity of Pt-SPE, which has already been shown to have a higher activity than a Pt electrode. SPE is an abbreviation for Nafion, a solid polymer electrolyte. It is suggested that this dual enhancement of the oxidation rate for PtSn-SPE and PtRu-SPE catalysts is due to the modification of the oxidation state of Pt by Sn and Ru and to the presence of H₂O and CH₃OH, both modified by the SPE matrix. This modification appears to weaken their hydrogen bonds in solution. Both Pt and Ir have catalytic properties for methanol oxidation, but a PtIr-SPE catalyst showed a more enhanced catalytic activity than either of them. This will be discussed in terms of Ir, oxidized at relatively low positive potentials, assisting the redox process of Pt⁰/Pt²⁺ or Pt²⁺/Pt⁴⁺ in the SPE matrix, where CH₃OH and H₂O are present in modified forms. For comparison, IrPd-SPE was also used as an electrode and showed a higher activity than Ir alone, although Pd did not have any activity toward methanol oxidation in sulfuric acid solution. Irrespective of the kind of Pt-SPEs, the Tafel slope was approximately 120 mV; the CH₃OH concentration dependence was of the order of 0.2–0.6. The pH dependence was nearly 0.5 against NHE. The activation energy of the Pt-SPEs for the reaction ranged between 20 and 33 kJ mol^–1.