| 斜管除油罐的结构设计与计算 |
| |
| 引用本文： | 高昆,杨影影,刘哿,杜畅,张辉英,陈虞浩,张巧灵.斜管除油罐的结构设计与计算[J].工业用水与废水,2017,48(3):66-69. |
| |
| 作者姓名： | 高昆 杨影影 刘哿 杜畅 张辉英 陈虞浩 张巧灵 |
| |
| 作者单位： | 1. 寰球工程项目管理(北京)有限公司,北京,100029;2. 中国寰球工程有限公司,北京,100012;3. 大港油田采油工艺研究院,天津,300280;4. 大港油田测试公司,天津,300280 |
| |
| 摘 要： | 针对委内瑞拉某油田项目中,稠油污水油含量大、乳化程度高等特点。选用调储-除油-气浮-过滤-注水的技术路线处理含油污水,其中采用立式斜管除油罐作为油水分离的主要处理设备。处理后污水中油的质量浓度不超过100 mg/L,达到溶气气浮进水水质要求。根据SY/T 0083—2008《除油罐设计规范》和GB 50284—2015《油田采出水处理设计规范》,简要总结了立式斜管除油罐的设计计算过程。
|
| 关 键 词： | 除油罐 斜管 选型计算 设计 除油 |
Design and calculation of inclined-tube oil removal tank |
| |
| GAO Kun,YANG Ying-ying,LIU Ge,DU Chang,ZHANG Hui-ying,CHEN Yu-hao,ZHANG Qiao-ling.Design and calculation of inclined-tube oil removal tank[J].Industrial Water & Wastewater,2017,48(3):66-69. |
| |
| Authors: | GAO Kun YANG Ying-ying LIU Ge DU Chang ZHANG Hui-ying CHEN Yu-hao ZHANG Qiao-ling |
| |
| Abstract: | In view of the characteristics of the oily sewage from an oilfield in Venezuela such as high oil content, heavy emulsification and so on, control storage-oil removal-air flotation-filtration-injection process was adopted for its treatment, and vertical inclined-tube oil removal tank was used as the key oil-water separation equipment. The mass concentration of oil in the effluent water after the treatment was not above 100 mg/L, which met the influent water quality requirement of dissolved air flotation. The design philosophy and calculation method of the vertical inclined-tube oil removal tank were summarized briefly according to SY/T 0083—2008 Design Specification of Oil Removal Tank and GB 50284—2015 Code for Design of Oil Field Produced Water Treatment. |
| |
| Keywords: | oil removal tank inclined-tube type selection and calculation design oil removal |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
