| 数控车削椭圆曲线探析 |
| |
| 引用本文： | 葛晓阳,程军,郭军. 数控车削椭圆曲线探析[J]. 机械制造与自动化, 2010, 39(2): 172-174 |
| |
| 作者姓名： | 葛晓阳 程军 郭军 |
| |
| 作者单位： | 沈阳工业大学辽阳校区,辽宁,辽阳,111003;建龙集团抚顺新钢铁有限责任公司,辽宁,抚顺,113001 |
| |
| 摘 要： | 从四弧逼近法和宏程序编程方法两方面对数控车削椭圆曲线的精加工和粗加工进行了探讨.用两种方法编制的椭圆曲线粗加工宏程序,解决了G71指令不能调用宏程序进行粗加工的问题,使椭圆曲线的粗加工简单易行.
|
| 关 键 词： | 数控车削 椭圆 宏程序 |
Discussion of Numeric Control Turning Ellipse Curve |
| |
| GE Xiao-yang,CHENG Jun,GUO Jun. Discussion of Numeric Control Turning Ellipse Curve[J]. Machine Building & Automation, 2010, 39(2): 172-174 |
| |
| Authors: | GE Xiao-yang CHENG Jun GUO Jun |
| |
| Affiliation: | GE Xiao-yang1,CHENG Jun1,GUO Jun2(1.Liaoyang Campus,Shenyang University of Technology,Liaoyang 111003,China,2.Jianlong Group Fushun New Iron , Steel Company LTD.Fushun 113001,China) |
| |
| Abstract: | Finishing machining and rough machining for numeric control turning ellipse curve are investigated through four arc approximation method and the macro program method.The two methods are used to program the macro for the ellipse curve rough machining to resolve the problem that G71 could not carry out rough machining with the macro program.By the way,it makes the rough machining ellipse curve very simple and easy. |
| |
| Keywords: | numeric control turning ellipse macro program |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
