| Marx发生器LCC谐振充电工作仿真分析 |
| |
| 引用本文： | 王晓明,侯召政,方辉,孙兆冲. Marx发生器LCC谐振充电工作仿真分析[J]. 计算机仿真, 2008, 25(6) |
| |
| 作者姓名： | 王晓明 侯召政 方辉 孙兆冲 |
| |
| 作者单位： | 哈尔滨工业大学电气工程及自动化学院,黑龙江,哈尔滨,150001;哈尔滨工业大学电气工程及自动化学院,黑龙江,哈尔滨,150001;哈尔滨工业大学电气工程及自动化学院,黑龙江,哈尔滨,150001;哈尔滨工业大学电气工程及自动化学院,黑龙江,哈尔滨,150001 |
| |
| 基金项目： | 哈尔滨工业大学校科研和教改项目 |
| |
| 摘 要： | 为满足Marx发生器的充放电脉冲工作要求,提出采用恒导通时间-恒频率控制策略的LCC串并联谐振变换器作为IGBT开关Marx发生器的充电电源.利用Pspice软件和等效模型模态方法对断续模式工作的LCC变换器实现软开关的原理进行分析,给出设计原则.仿真结果表明变换器能够以较高效率满足Marx发生器从短路到开路的宽范围变动工作特性的充电要求,实现高达1KHz重复频率变频变脉宽稳定运行.所提出的方法为研发制造紧凑型一体化高重复频率Marx发生器式功率脉冲电源开辟了一条新路.
|
| 关 键 词： | 串并联谐振 马克斯发生器 功率脉冲电源 仿真 |
Analysis of the Operation of LCC Resonant Converter Charging Marx Generator |
| |
| WANG Xiao-ming,HOU Zhao-zheng,FANG Hui,SUN Zhao-chong. Analysis of the Operation of LCC Resonant Converter Charging Marx Generator[J]. Computer Simulation, 2008, 25(6) |
| |
| Authors: | WANG Xiao-ming HOU Zhao-zheng FANG Hui SUN Zhao-chong |
| |
| Affiliation: | WANG Xiao-ming,HOU Zhao-zheng,FANG Hui,SUN Zhao-chong(Harbin Institute of Technology,Harbin Heilongjiang 150001,China) |
| |
| Abstract: | To meet the charging and discharging requirement of the Marx generator in pulse operation, a LCC series-parallel resonant converter under constant on-time/constant frequency control worked as the charging power supply of IGBT switch-based Marx generator is presented. Pspice and mode analysis of equivalent circuits are used to analyze the principle of the LCC converter in discontinuous mode to realize soft switching. The design principle is also proposed. The simulation result indicates that with good chargi... |
| |
| Keywords: | Series-parallel resonant Marx generator Pulsed power supply Simulation |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
