首页 | 本学科首页   官方微博 | 高级检索  
     

钒和铜对高合金白口铸铁铸态组织及性能的影响
引用本文:马建平,张云鹏,杨迎东,王国良. 钒和铜对高合金白口铸铁铸态组织及性能的影响[J]. 铸造技术, 2007, 28(5): 631-634,638
作者姓名:马建平  张云鹏  杨迎东  王国良
作者单位:1. 西安理工大学,陕西,西安,710048
2. 金堆城钼业公司机电修配厂,陕西,华县,714102
摘    要:针对磨钼矿用磨球的湿式磨损工矿条件,通过对高合金白口铸铁进行成分设计、材料制备以及相应的性能测试和组织观察,分析了不同配比的Cu和V对高合金白口铸铁铸态组织及性能的影响.研究结果表明,不同的Cu和V含量对高合金白口铸铁碳化物的形态和分布影响不同.含量为1.0%的Cu和V的该合金(12.0%Cr),其碳化物呈现短杆状、块状,均匀弥散分布于基体中,材料的硬度、冲击韧度和耐腐蚀磨损性能得到有效提高,相对耐磨性比不含Cu、V的普通高铬铸铁(18.0%Cr)约提高了15%.

关 键 词:高合金白口铸铁  合金化  成分及组织  腐蚀磨损
文章编号:1000-8365(2007)05-0631-04
修稿时间:2006-11-172007-03-09

Influence of Copper and Vanadium on Microstructure and Properties of High Alloy White Cast Iron
MA Jian-ping,ZHANG Yun-peng,YANG Ying-dong,WANG Guo-liang. Influence of Copper and Vanadium on Microstructure and Properties of High Alloy White Cast Iron[J]. Foundry Technology, 2007, 28(5): 631-634,638
Authors:MA Jian-ping  ZHANG Yun-peng  YANG Ying-dong  WANG Guo-liang
Abstract:The influence of different proportion of copper and vanadium on as-cast microstructure and properties of high alloy white cast iron was studied by composition design, e material preparation, property test and microstructure analysis on the working condition of wet wear for grinding balls used in molybdenum mineral. The results show that different contents of copper and vanadium have different effects on the morphology and distribution of carbide of the high alloy white cast iron. The morphology of the carbide distributed uniformly in the matrix is short bar or block in the alloy(12.0% Cr) with copper 1.0% and vanadium 1.0%, thus improve hardness, impact toughness and abrasion corrosion resistance of the material effectively. Its relative abrasion corrosion resistance is approximately 15% higher than that of the plain high chromium casts iron (18. 0% Cr) without copper and vanadium.
Keywords:High alloy white cast iron   Alloying   Composition and structure   Corrosive wear
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号