| 温度对挤出吹塑制件壁厚分布及性能的影响 |
| |
| 引用本文： | 邱方军,王海民,李能文.温度对挤出吹塑制件壁厚分布及性能的影响[J].精密成形工程,2009,1(2):48-51. |
| |
| 作者姓名： | 邱方军 王海民 李能文 |
| |
| 作者单位： | 重庆理工大学材料科学与工程学院,重庆,400050 |
| |
| 基金项目： | 重庆市科委科技攻关计划 |
| |
| 摘 要： | 为实现挤出吹塑制件壁厚均匀分布和提高制件性能,国内外学者从挤出吹塑过程的3个阶段:型坯成型、型坯吹胀以及制品冷却与固化阶段,研究了温度对制件壁厚分布及其性能的影响情况.分析了温度对其成形及性能的影响,综述了前人研究成果.
|
| 关 键 词： | 挤出吹塑 温度 研究进展 |
| 收稿时间： | 2009/7/13 0:00:00 |
| 修稿时间： | 2009/9/10 0:00:00 |
Influence of Temperature on Parts` Wall Thickness and Properties in Extrusion Blow Molding |
| |
| QIU Fang-jun,WANG Hai-min and LI Neng-wen.Influence of Temperature on Parts` Wall Thickness and Properties in Extrusion Blow Molding[J].Journal of Netshape Forming Engineering,2009,1(2):48-51. |
| |
| Authors: | QIU Fang-jun WANG Hai-min and LI Neng-wen |
| |
| Affiliation: | College of Material Science and Engineering, Chongqing University of Technology, Chongqing 400050, China,College of Material Science and Engineering, Chongqing University of Technology, Chongqing 400050, China and College of Material Science and Engineering, Chongqing University of Technology, Chongqing 400050, China |
| |
| Abstract: | In order to realize uniform wall thickness distribution and improve the performance of extrusion blow molding parts, domestic and foreign scholars have made some research on the extrusion blow molding process in three stages: forming parison, parison inflation, as well as cooling and curing stage. The influence of temperature on the wall thickness distribution of parts, their shapes and their performance is researched. An overview of the results of previous studies is made. |
| |
| Keywords: | extrusion blow molding temperature research progress |
| 本文献已被 万方数据 等数据库收录！ |
| 点击此处可从《精密成形工程》浏览原始摘要信息 |
|
点击此处可从《精密成形工程》下载全文 |
|
