| 一模两件锻造的探讨和应用 |
| |
| 引用本文： | 贾振平. 一模两件锻造的探讨和应用[J]. 精密成形工程, 2009, 1(3): 74-78 |
| |
| 作者姓名： | 贾振平 |
| |
| 作者单位： | 綦江綦齿锻造有限公司,重庆,401421 |
| |
| 摘 要： | 对简单锻件、截面差变化较大锻件和带落差锻件等3类锻件进行了一模两件锻造分析、计算和设计.根据3类锻件的特点,对锻造所需设备进行了吨位的计算及合理地排列,总结出了灵活运用一模两件锻造的一般规律和方法.一模两件锻造与传统的锻造工艺相比,有提高模具寿命、提高生产效率、节约生产成本等优点.
|
| 关 键 词： | 一模两件 制坯 截面差 错移力 落差 对称 |
| 收稿时间： | 2009-06-13 |
| 修稿时间： | 2009-11-10 |
The Research on Two-cavities in one Mould in Forging and Application |
| |
| JIA Zhen-ping. The Research on Two-cavities in one Mould in Forging and Application[J]. Journal of Netshape Forming Engineering, 2009, 1(3): 74-78 |
| |
| Authors: | JIA Zhen-ping |
| |
| Affiliation: | Qi Jiang Qi Chi Forging Co. Ltd., Chongqing 401421,China |
| |
| Abstract: | The feasibility research on two-cavity in one mould to simple forgings, forgings with a big section difference and forgings with drop is concerned in the paper. The rules and methods of the manufacturing technology on more than one cavity in one mould are concluded through practical experiments. |
| |
| Keywords: | two-cavity in one mould blank manufacturing section difference dislocation force drop symmetry |
| 本文献已被 万方数据 等数据库收录！ |
| 点击此处可从《精密成形工程》浏览原始摘要信息 |
|
点击此处可从《精密成形工程》下载免费的PDF全文 |
|
