首页 | 本学科首页   官方微博 | 高级检索  
     

水性聚酯/环氧卷材底漆的研究
引用本文:李锐,林安.水性聚酯/环氧卷材底漆的研究[J].电镀与涂饰,2012,31(5):56-59.
作者姓名:李锐  林安
作者单位:1. 宝山钢铁股份有限公司冷轧厂,上海,201900
2. 武汉大学资源与环境科学学院环境工程系,湖北武汉,430079
摘    要:为了解决日益严峻的环境问题,水性涂料成为未来环境友好型涂料的发展方向.以水性饱和聚酯和水性环氧树脂物理混合的方法研制水性卷材底漆,讨论了聚酯和环氧的质量比以及不同固化剂对漆膜性能的影响,并通过电化学阻抗谱探讨了漆膜的耐蚀机理.结果表明,当聚酯和环氧树脂的质量比为7∶3时,以部分甲醚化的氨基树脂SM5717为固化剂,所得...

关 键 词:卷材涂料  饱和聚酯  环氧树脂  固化剂  耐蚀机理

Study on water-based polyester/epoxy primer for coil materials
LI Rui , LIN An.Study on water-based polyester/epoxy primer for coil materials[J].Electroplating & Finishing,2012,31(5):56-59.
Authors:LI Rui  LIN An
Affiliation:Cold-Rolled Plant,Baoshan Iron & Steel Co.,Ltd.,Shanghai 201900,China
Abstract:To solve the serious environmental problems,the water-based coating will become a development orientation of environment-friendly coating in the future.A waterborne primer for coil materials was prepared by physical mix of waterborne saturated polyester with waterborne epoxy resin.The influence of mass ratio of polyester to epoxy and different curing agents on film performance was discussed.The corrosion resistance mechanism of the film was studied by electrochemical impedance spectroscopy.The results indicated that the obtained film prepared with a mass ratio of polyester to epoxy resin 7:3 and partially methylated amino resin SM5717 as curing agent has good comprehensive performance:cross-cut adhesion strength 0 grade,T-bend 1T,pencil hardness 3H,MEK resistance >100 times,and salt spray resistance 450 h.
Keywords:coil coating  saturated polyester  epoxy resin  curing agent  anticorrosion mechanism
本文献已被 CNKI 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号