首页 | 本学科首页   官方微博 | 高级检索  
     

紫铜基体上组合电刷镀厚镍层的工艺
引用本文:廖磊,刘锦云,张书,韩天龙,徐海森. 紫铜基体上组合电刷镀厚镍层的工艺[J]. 电镀与涂饰, 2012, 31(1): 23-25
作者姓名:廖磊  刘锦云  张书  韩天龙  徐海森
作者单位:西华大学材料科学与工程学院,四川成都,610039
摘    要:研究了快速镍、低应力镍刷镀时间对紫铜表面镍镀层的厚度、显微硬度及结合强度的影响。单层快速镍及单层低应力镍较适宜的刷镀时间为15~20min。采用15min快速镍与15min低应力镍交替组合刷镀镍,所得镍镀层的厚度、显微硬度及耐淬火次数分别达50μm、400HV及46次,镀层组织清晰而均匀,镀层与镀层之间、镀层与基体之间结合良好,符合理想厚镍镀层的性能要求。

关 键 词:紫铜  电刷镀镍  厚度  显微硬度  结合力

Multi-brush plating process for thick nickel coating on pure copper substrate
LIAO Lei , LIU Jin-yun , ZHANG Shu , HAN Tian-long , XU Hai-sen. Multi-brush plating process for thick nickel coating on pure copper substrate[J]. Electroplating & Finishing, 2012, 31(1): 23-25
Authors:LIAO Lei    LIU Jin-yun    ZHANG Shu    HAN Tian-long    XU Hai-sen
Affiliation:School of Material Science and Engineering,Xihua University,Chengdu 610039,China
Abstract:The effects of fast and low-stress nickel brush plating time on the thickness,microhardness,and adhesion strength of nickel coating on pure copper substrate were studied.The suitable brush plating time for single-layer fast or low-stress nickel coating is 15-20min.The thickness,microhardness,and quenching resistance of the coating obtained by brush plating fast and low-stress nickel coatings for 15min alternately is up to 50μm,400 HV,and 46 times respectively.The structure of the coating is clear and uniform,and the adhesion between coatings or between coating and substrate is good,meeting the performance requirements of ideal thick nickel coating.
Keywords:pure copper  brush nickel plating  thickness  microhardness  adhesion strength
本文献已被 CNKI 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号