| 基于熔融沉积成型技术的支撑算法设计 |
| |
| 引用本文： | 徐铠,赵东标.基于熔融沉积成型技术的支撑算法设计[J].机械与电子,2018,0(1):35-40. |
| |
| 作者姓名： | 徐铠 赵东标 |
| |
| 作者单位： | (南京航空航天大学机电学院,江苏 南京 210016) |
| |
| 摘 要： | 针对现有的熔融沉积成型支撑结构生成算法中耗材量大和结构不合理的缺陷,提出了一种支撑结构的生成算法。试验结果表明,该算法基于熔丝能够悬空的最大长度为判断标准来选择模型上的待支撑区域,能够减少打印耗材和打印时间。
|
| 关 键 词： | 熔融沉积成型 支撑结构 熔丝 |
Support Algorithm for Fused Deposition Modeling |
| |
| XU Kai,ZHAO Dongbiao.Support Algorithm for Fused Deposition Modeling[J].Machinery & Electronics,2018,0(1):35-40. |
| |
| Authors: | XU Kai ZHAO Dongbiao |
| |
| Affiliation: | (College of Mechanical and Electronic Engineering, Nanjing University of Aeronautics and Astronautics,
Nanjing 210016,China) |
| |
| Abstract: | A generating algorithm of supporting structure is proposed in this study to reduce the large consumption in the present algorithm. The experimental results show that the proposed algorithm can reduce the cost of material and time during the process of printing, for it selects the region to be supported based on the maximum suspending length of the fuse. |
| |
| Keywords: | fused deposition modeling supporting structure filament |
| 本文献已被 CNKI 等数据库收录！ |
| 点击此处可从《机械与电子》浏览原始摘要信息 |
|
点击此处可从《机械与电子》下载全文 |
