| 基体粉末与增强粒子的粒度级配对SiCp/Fe性能的影响 |
| |
| 引用本文： | 王耀勉,宗亚平,李杰. 基体粉末与增强粒子的粒度级配对SiCp/Fe性能的影响[J]. 材料研究学报, 2009, 23(5) |
| |
| 作者姓名： | 王耀勉 宗亚平 李杰 |
| |
| 作者单位： | 东北大学材料各向异性与织构教育部重点实验室,沈阳,110004 |
| |
| 基金项目： | 国家自然科学基金50771028和50471024资助项目 |
| |
| 摘 要： | 使用不同粒度的铁粉,采用电流直加热动态热压烧结工艺制备了10%(体积分数)的SiC颗粒增强铁基复合材料,研究了铁粉与SiC粒子颗粒级配对复合材料显微组织和力学性能的影响.结果表明,SiC粒子与铁粉的颗粒级配,显著影响复合材料基体中增强粒子的分布状况和力学性能.建立了粒子分布的双基体颗粒级配模型,只有铁粉中一次颗粒与二次颗粒的粒径比为6.5、二次颗粒含量为4.6%、铁粉一次颗粒与SiC的粒度比值为15.9时,SiC颗粒才能很好地填充铁粉间隙并均匀地分布在基体中,复合材料将具有较高的力学性能.模型计算的结果和实验结果相符合.
|
| 关 键 词： | 复合材料 粒子分布模型 粉末颗粒级配 电流直加热动态热压烧结 力学性能 |
Effect of size match between matrix powder and particulate reinforcement on mechanical properties of SiCp/Fe composites |
| |
| WANG Yaomian,ZONG Yaping,LI Jie. Effect of size match between matrix powder and particulate reinforcement on mechanical properties of SiCp/Fe composites[J]. Chinese Journal of Materials Research, 2009, 23(5) |
| |
| Authors: | WANG Yaomian ZONG Yaping LI Jie |
| |
| Affiliation: | WANG Yaomian ZONG Yaping~(**) LI Jie (Key Laboratory for Anisotropy , Texture of Materials,Ministry of Education,Northeastern University,Shenyang 110004) |
| |
| Abstract: | 10%SiCp/Fe composites were fabricated by means of specimen current heating dynamic hot press sintering with iron powder with different sizes.The results demonstrate that the iron powder size has great influence on the distribution of SiC particulates in the composite,and therefore on the mechanical properties.A model,considering iron powder as the mixture of two sorts of particles with different sizes,is suggested based on the results.The modeling shows that only the size ratios of coarse iron powder to fin... |
| |
| Keywords: | composites particle distribution model size match specimen current heating dynamic hot press sintering mechanical properties |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
