| 减速器齿轮开裂分析 |
| |
| 引用本文： | 谢飞,潘建伟,杨为民. 减速器齿轮开裂分析[J]. 江苏石油化工学院学报, 2005, 0(2) |
| |
| 作者姓名： | 谢飞 潘建伟 杨为民 |
| |
| 作者单位： | 江苏工业学院材料科学与工程系，江苏工业学院材料科学与工程系，常州齿轮厂 江苏常州213016，江苏常州213016 |
| |
| 摘 要： | 从渗碳层深度、硬度与组织、齿轮材质、裂纹区组织与硬度等方面对开裂的渗碳齿轮进行了检测和分析。结果表明,齿轮上的裂纹虽然是在渗碳淬火、回火后的磨削时发现,但系锻造裂纹,而非淬火裂纹。给出了避免出现锻造裂纹的措施。
|
| 关 键 词： | 齿轮 开裂 渗碳 组织 锻造裂纹 |
Analysis of the Cracking of Reducing Gear |
| |
| XIE Fei,PAN Jian-wei,YANG Wei-min. Analysis of the Cracking of Reducing Gear[J]. Journal of Jiangsu Institute of Petrochemical Technology, 2005, 0(2) |
| |
| Authors: | XIE Fei PAN Jian-wei YANG Wei-min |
| |
| Affiliation: | XIE Fei~1,PAN Jian-wei~1,YANG Wei-min~2 |
| |
| Abstract: | A series of experiments and analyses have been carried out on the cracking reducing gear. They include the assessment of the depth, hardness and structure of carburization case,quality of raw materials, structure and micro-hardness in cracking zone.The results show that the cracks are induced during forging of the gear even though they are discovered during the grounding process after quenching and tempering following carburization. Precautions against forging crack are given. |
| |
| Keywords: | gear cracking carburization structure forging crack |
| 本文献已被 CNKI 等数据库收录！ |
