| 最小区域法平面度计算软件的实现 |
| |
| 引用本文： | 周志春.最小区域法平面度计算软件的实现[J].福建质量信息,2014(1):4-7. |
| |
| 作者姓名： | 周志春 |
| |
| 作者单位： | 福建省计量科学研究院,福建福州350003 |
| |
| 摘 要： | 平面度误差是平板实际工作面对理想平面的变动量。文中介绍了平板平面度误差的主要检测和评定方法。用Visualc#2008开发工具结合Matlab开发了基于最小区域算法的平板平面度计算程序。通过实例验证了程序计算过程简便、快速，计算结果准确、可靠，评定结果符合最小条件。
|
| 关 键 词： | 平板 平面度 最小区域法 最小条件 最小包容面 |
The Flatness Calculating Software Using Minimum Zone Method |
| |
| ZHOU Zhi-Chun.The Flatness Calculating Software Using Minimum Zone Method[J].Fujian Quality Information,2014(1):4-7. |
| |
| Authors: | ZHOU Zhi-Chun |
| |
| Affiliation: | ZHOU Zhi-Chun ( Fujian Metrology Institute, Fuzhou 350003, Fujian, China) |
| |
| Abstract: | Flatness error is the variation between actual surface and ideal surface of surface plates. This paper introduces the main measurement and evaluation method of flatness error. The flatness calculating program based on the minimum zone method has been developed using Visual C# 2008 development tools and Matlab. The example shows that the calculation process is simple and rapid; calculation result is accurate and reliable, evaluation result accords with minimal conditions. |
| |
| Keywords: | Surface plates Flatness Minimum zone method Minimal conditions Minimum tolerate surface |
| 本文献已被 CNKI 维普 等数据库收录！ |
