首页 | 本学科首页   官方微博 | 高级检索  
     

Effect of the addition of Al-Ti-C master alloy on the microstructure and microhardness of a cast Al-10Mg alloy
作者姓名:Kuibo  Yin  Xiufang  Bian  Na  Han  Xiujun  Yao  Yan  Zhao  Jiankun  Zhou
作者单位:[1]Key Lab of Liquid Structures and Heredity of Materials, Ministry of Education, Shandong University, South Campus, Jinan 250061, China [2]National Laboratory of Solid State Microstructures, Nanjing University, Nanjing 210093, China
基金项目:This work was financially supported by the National Natural Science Foundation of China (No. 50231040).
摘    要:The microstructure and microhardness of a cast Al-10wt%Mg (henceforth Al-10Mg) alloy with 0.2wt% addition of Al- 5Ti-0.25C master alloy were compared with those of a refiner-free alloy of similar chemical composition. It was found that this level of the master alloy addition not only caused an effective grain refinement, but also caused a significant increase in the microhardness of the Al-10Mg alloy. Microchemical analysis revealed that TiC particles existed in the grain center. The relationship between the holding time and grain size was also studied. It shows that the grain refining efficiency is faded observably with the holding time. This is explained in terms of the instability of TiC particles.

关 键 词:中间合金  显微硬度  晶粒细化  Al-Mg  Al-Ti-C  铝合金
收稿时间:2005-03-22

Effect of the addition of Al-Ti-C master alloy on the microstructure and microhardness of a cast Al-10Mg alloy
Kuibo Yin Xiufang Bian Na Han Xiujun Yao Yan Zhao Jiankun Zhou.Effect of the addition of Al-Ti-C master alloy on the microstructure and microhardness of a cast Al-10Mg alloy[J].Journal of University of Science and Technology Beijing,2006,13(2):149-153.
Authors:Kuibo Yin  Xiufang Bian  Na Han  Xiujun Yao  Yan Zhao  Jiankun Zhou
Affiliation:1. Key Lab of Liquid Structures and Heredity of Materials, Ministry of Education, Shandong University, South Campus, Jinan 250061, China;National Laboratory of Solid State Microstructures, Nanjing University, Nanjing 210093, China
2. Key Lab of Liquid Structures and Heredity of Materials, Ministry of Education, Shandong University, South Campus, Jinan 250061, China
Abstract:The microstructure and microhardness of a cast Al-10wt%Mg (henceforth Al-10Mg) alloy with 0.2wt% addition of Al-5Ti-0.25C master alloy were compared with those of a refiner-free alloy of similar chemical composition. It was found that this level ofthe master alloy addition not only caused an effective grain refinement, but also caused a significant increase in the microhardness ofthe Al-10Mg alloy. Microchemical analysis revealed that TiC particles existed in the grain center. The relationship between the holdingtime and grain size was also studied. It shows that the grain refining efficiency is faded observably with the holding time. This is ex-plained in terms of the instability of TiC particles.
Keywords:Al-Mg alloy  Al-Ti-C alloy  microhardness  grain refinement
本文献已被 CNKI 维普 万方数据 ScienceDirect 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号