| 基于特征的冲压件CAD／CAPP／CAE集成 |
| |
| 引用本文： | 虞春,李峰.基于特征的冲压件CAD／CAPP／CAE集成[J].模具技术,1999(3):3-9,14. |
| |
| 作者姓名： | 虞春 李峰 |
| |
| 作者单位： | 上海交通大学塑性成形工程系!上海，200030，上海交通大学塑性成形工程系!上海，200030，上海交通大学塑性成形工程系!上海，200030，上海交通大学塑性成形工程系!上海，200030 |
| |
| 摘 要： | 描述了基于特征的冲压件ＣＡＤ／ＣＡＰＰ／ＣＡＥ系统集成，首先着重介绍了冲压件的特征建模技术，引入面向ＣＡＥ分析的特定定义方式，其次阐述了系统集成的原理，指明系统集成的最终目的是实现设计与分析的自适应。最后提出了系统集成的具体实施途径。
|
| 关 键 词： | 特征 冲压件 CAD CAPP CAE 系统集成 |
Feature-based CAD/CAPP/CAE Integration of Stamping Parts |
| |
| Yu chun.Feature-based CAD/CAPP/CAE Integration of Stamping Parts[J].Die and Mould Technology,1999(3):3-9,14. |
| |
| Authors: | Yu chun |
| |
| Abstract: | This paper describes the feature-based CAD/CAPP/CAE integration of stamping parts. Firstly the feature-based modeling techniques of stampingparts are discussed and the CAE-oriented feature definition method is introduced. Then the principle of system integration is given and the target of the system is pointed out to realize the design-analysis self-adaptation. Finally, the way of system integration is specified. |
| |
| Keywords: | feature stamping-parts CAD/CAPP/CAE system integration |
| 本文献已被 CNKI 维普 等数据库收录！ |
