| 基于阴影的激光深熔焊熔池形态分析 |
| |
| 引用本文： | 张艳喜,高向东. 基于阴影的激光深熔焊熔池形态分析[J]. 焊接学报, 2014, 35(11): 27-30 |
| |
| 作者姓名： | 张艳喜 高向东 |
| |
| 作者单位： | 广东工业大学机电工程学院, 广州 510006 |
| |
| 基金项目： | 国家自然科学基金资助项目(51175095)；广东省自然科学基金资助项目(10251009001000001)；广东省学科建设科技创新项目 |
| |
| 摘 要： | 熔池形态特别是熔池体积使用现有测量手段难以直接进行测量.采用大功率盘形激光对304型不锈钢厚板进行平板堆焊,通过外加辅助强红外激光光源投射熔池阴影,采用高速摄像机加装组合滤光片摄取清晰地熔池及其阴影动态图像,提取焊接过程中熔池投射阴影的面积变化,并进行一元线性回归和相关性分析.结果表明,熔池的阴影面积变化与焊接质量存在正相关性,为焊接质量检测提供了新方法.
|
| 关 键 词： | 大功率盘形激光焊 熔池阴影 熔池形态 焊接质量 |
| 收稿时间： | 2013-05-14 |
Morphology of molten pool based on shadow during highpower laser deep penetration welding |
| |
| ZHANG Yanxi and GAO Xiangdong. Morphology of molten pool based on shadow during highpower laser deep penetration welding[J]. Transactions of The China Welding Institution, 2014, 35(11): 27-30 |
| |
| Authors: | ZHANG Yanxi and GAO Xiangdong |
| |
| Affiliation: | School of Electromechanical Engineering, Guangdong University of Technology, Guangzhou 510006, China |
| |
| Abstract: | The morphology of molten pool, especially the volume of molten pool can not be measured directly by the current measurement methods. In this study, surfacing welding of thick 304 stainless steel plate with high-power disk laser welding was conducted. With extra auxiliary infrared laser light and highspeed camera, clear images of the molten pools and their shadows were obtained, and then the shadow area of molten pool was extracted to be analyzed by one-dimensional linear regression equation and correlation coefficient analysis method. The experimental results confirmed that the shadow area variation of molten pool had positive correlation with welding quality, and this provided a new method for test of welding quality. |
| |
| Keywords: | high-power disk laser welding shadow of molten pool morphology of molten pool welding quality |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
| 点击此处可从《焊接学报》浏览原始摘要信息 |
|
点击此处可从《焊接学报》下载免费的PDF全文 |
|
