| 钳口夹紧机构的优化设计 |
| |
| 引用本文： | 王驰,任云鹏,李学飞,陈希红.钳口夹紧机构的优化设计[J].重型机械,2010(2):45-47,50. |
| |
| 作者姓名： | 王驰 任云鹏 李学飞 陈希红 |
| |
| 作者单位： | 1. 沈阳重型机械集团,辽宁,沈阳,110024
2. 吉林大学机械科学与工程学院,吉林,长春,130022 |
| |
| 摘 要： | 介绍了大型锻造操作机的钳口夹紧力的计算方法。以保证钳口夹紧力要求条件下夹紧缸作用力最小为优化目标,建立了夹紧机构优化设计的数学模型,采用遗传算法对钳口夹紧机构参数进行了优化设计。分析结果表明,优化后油缸推力比原来降低了22.8%。
|
| 关 键 词： | 优化设计 遗传算法 钳口夹紧机构 |
Optimization design of jaw clamping mechanism |
| |
| WANG Chi,REN Yun-peng,LI Xue-fei,CHEN Xi-hong.Optimization design of jaw clamping mechanism[J].Heavy Machinery,2010(2):45-47,50. |
| |
| Authors: | WANG Chi REN Yun-peng LI Xue-fei CHEN Xi-hong |
| |
| Affiliation: | WANG Chi1,REN Yun-peng1,LI Xue-fei2,CHEN Xi-hong1(1.Shenyang North Heavy Industry,Shenyang 110024,China,2.College of Mechanical Science , Engineering,Jilin University,Changchun 130022,China) |
| |
| Abstract: | This paper introduces the structure and working principle of the large-scale forging manipulator and gives the calculation method of the jaw clamping force.The mathematical model of optimization design of the clamping mechanism was established to obtain the minimum value of the clamping force under the premise that the force meets the clamping requirements.The genetic algorithm was used to optimize parameters of the jaw clamping mechanism and the optimization results were analyzed.The thrust of the cylinder... |
| |
| Keywords: | optimization design genetic algorithm jaw clamping mechanism |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
