| Be元素对7475Al合金再结晶及性能的影响 |
| |
| 引用本文： | 夏露,李尧,陈洪. Be元素对7475Al合金再结晶及性能的影响[J]. 湖北工业大学学报, 2000, 0(1) |
| |
| 作者姓名： | 夏露 李尧 陈洪 |
| |
| 作者单位： | 湖北工学院机械工程系!湖北武汉430068 |
| |
| 摘 要： | 通过再结晶退火方法 ,研究了 Be元素对 7475 Al合金的硬度—保温时间关系曲线、再结晶体积百分数—保温时间关系曲线及晶粒度的影响 .结果表明 :在 7475 Al合金中加入一定量的 Be,能有效地提高合金再结晶温度 ,降低再结晶速度 ,能使合金硬度提高近 1倍 ,同时还可使合金晶粒有效地细化 .
|
| 关 键 词： | 7475Al合金 铍 再结晶 表面硬度 |
Influence of Beryllium on 7475Al Alloy Recrystallization and Properties |
| |
| XIA Lu,LI Yao,CHEN Hong. Influence of Beryllium on 7475Al Alloy Recrystallization and Properties[J]. Journal of Hubei University of Technology, 2000, 0(1) |
| |
| Authors: | XIA Lu LI Yao CHEN Hong |
| |
| Abstract: | This paper researches the influence of beryllium on 7475Al alloy hardness time curve, recrystallization volumn percentage time curve and grain size by recrystallization annealing. It was found that the addition of a suitable amount beryllium can increase 7475Al alloy recrystallization temperature, reduce recrystallization speed, double the surface hardness, and make the grain refine effectivly at the same time. |
| |
| Keywords: | 7475Al alloy beryllium recrystallization surface hardness |
| 本文献已被 CNKI 等数据库收录！ |
|
