首页 | 本学科首页   官方微博 | 高级检索  
     

静力压桩机调平系统的建模与控制
引用本文:胡均平,郭勇,王涛,化世阳.静力压桩机调平系统的建模与控制[J].昆明理工大学学报(理工版),2009,34(5):18-21.
作者姓名:胡均平  郭勇  王涛  化世阳
作者单位:中南大学,机电工程学院,湖南,长沙,410073
基金项目:湖南省科学技术厅科技计划项目 
摘    要:针对静力压桩机电液比例调平系统建立了分析调平控制方法精确的动力学模型,并对两种调平方法的效率、稳定性以及调平精度进行了分析.该模型将桩机平台等效为刚体,考虑平台3个自由度运动和调平控制系统的耦合,利用运动方向的相关参数对系统进行解耦,确立了调平系统的控制方程.分别采用绕最高点调平和方向解耦调平两种方法,结合调平系统的控制方程,对该系统的调平特性进行了分析.结果表明,系统采用方向解耦调平比绕最高点齐动调平的精度高一倍,稳定性也大大提高.

关 键 词:静力压桩机  调平控制  电液比例控制  动力响应

Modeling and Control of Self-Leveling System for Static Pile Driver
HU Jun-ping,GUO Yong,WANG Tao,HUA Shi-yang.Modeling and Control of Self-Leveling System for Static Pile Driver[J].Journal of Kunming University of Science and Technology(Natural Science Edition),2009,34(5):18-21.
Authors:HU Jun-ping  GUO Yong  WANG Tao  HUA Shi-yang
Affiliation:(College of Mechanical and Electronical Engineering, Central South University,Changsha 410083, China)
Abstract:The dynamic model of self - leveling control for static pile driver using electro - hydraulic proportional control system is put forward. The features of two self - leveling methods are analyzed. By taking the platform of pile driver as rigid body, considering the coupling of self- leveling control system and three DOF movements of the platform, using relative parameters of movements to decoupling,the control equations are acquired. The analyses of the system using two sorts of angle error control methods are then carried out. It is shown through the results that the precision of direction decoupling leveling method is twice as much as culmination trending method, and the stability is better.
Keywords:static pile driver  self- leveling control  electro -hydraulic proportional control  dynamic response
本文献已被 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号