| 基于SolidWorks的滑片压缩机三维造型设计 |
| |
| 引用本文： | 陆春晖.基于SolidWorks的滑片压缩机三维造型设计[J].压缩机技术,2006(5):26-28. |
| |
| 作者姓名： | 陆春晖 |
| |
| 作者单位： | 河海大学机电工程学院,江苏,常州,213022 |
| |
| 摘 要： | 利用SolidWorks软件以双作用滑片式压缩机的一个新型气缸型线方程为模型进行三维造型，在计算机上实现装配并验证设计方案的正确。以非全约束的特征建模技术所做三维造型和装配可以缩短零件生产周期。节省设计、开发和制造成本。
|
| 关 键 词： | 三维造型 双作用滑片压缩机 转子 气缸型线 |
| 文章编号： | 1006-2971(2006)05-0026-03 |
| 收稿时间： | 2006-07-02 |
| 修稿时间： | 2006年7月2日 |
Three Dimensions Model Design Based on Solidworks of the Sliding- Vane Compressor |
| |
| LU Chun-hui.Three Dimensions Model Design Based on Solidworks of the Sliding- Vane Compressor[J].Compressor Technology,2006(5):26-28. |
| |
| Authors: | LU Chun-hui |
| |
| Affiliation: | School of Mechanical - Electronic Engineering, Hohai University, Changzhou 213022, China |
| |
| Abstract: | By Solidworks, the three dimensions model based on a new cylinder profile equation of the doubleaction sliding vane compressor was assembled successfully in computer. The characteristic model is established under not all bounds technology. Thus, the period of procession can be shorten, the cost of design and production wiU be saved. |
| |
| Keywords: | three dimensions model double - action sliding vane compressor rotor cylinder profile |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
