首页 | 本学科首页   官方微博 | 高级检索  
     

无压浸渗制备Si3N4/Al复合材料的工艺与抗弹性能研究
引用本文:陈海东,王扬卫,王富耻,于晓东.无压浸渗制备Si3N4/Al复合材料的工艺与抗弹性能研究[J].兵器材料科学与工程,2005,28(1):39-43.
作者姓名:陈海东  王扬卫  王富耻  于晓东
作者单位:北京理工大学,材料科学与工程学院,北京,100081;北京理工大学,材料科学与工程学院,北京,100081;北京理工大学,材料科学与工程学院,北京,100081;北京理工大学,材料科学与工程学院,北京,100081
摘    要:利用铝镁合金无压渗入氮化硅多孔预制体的方法制得致密的富含有氮化铝相的陶瓷金属基复合材料,并分别就 热处理温度和浸渗温度对复合材料的显微组织、相组成和显微硬度的影响进行了观察和测定。试验发现浸渗温度越高或 热处理温度越高,则复合材料中AlN相含量越高;弹击试验显示该复合材料的局部效益系数比LC52提高一倍以上。

关 键 词:无压浸渗  热处理  Si3N4/Al复合材料  抗弹性能
文章编号:1004-244X(2005)01-0039-05
修稿时间:2003年10月29日

Procedure and ballistic resistance study of Si3N4/Al composite prepared by pressureless infiltration
CHEN Hai-dong,WANG Yang-wei,WANG Fu-chi,YU Xiao-dong.Procedure and ballistic resistance study of Si3N4/Al composite prepared by pressureless infiltration[J].Ordnance Material Science and Engineering,2005,28(1):39-43.
Authors:CHEN Hai-dong  WANG Yang-wei  WANG Fu-chi  YU Xiao-dong
Abstract:In this paper, the dense Si3N4/Al composite with high AlN content was prepared by pressureless infiltrating Al-Mg alloy into Si3N4 porous perform. The effects of infiltration temperatures and heat treatment temperatures on microstructures, phase constitute, microhardness of the composite were studied. The results indicate that the higher infiltration temperatures or heat treatment temperatures are, the more A1N content exists in the Si3N4/Al composite. Ballistic impact experiments show that the mass coefficient of Si3N4/Al composite is 50% higher than that of LC52.
Keywords:pressureless infiltration  heat treatment  Si3N4/Al composite  ballistic resistance
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号