Numerical and experimental validation of thermo-hygro-mechanical behaviour of wood during drying process

This research aims at developing a new approach able to simulate 3-D heat and moisture transfer coupled with the mechanical behaviour of a wood during drying process. From the moisture content and temperature profiles, a 3-D formulation and a relevant constitutive model are used to calculate the stress/strain evolution within the board due to shrinkage and external mechanical loading. This allows a fast, comprehensive and realistic model to be implemented. The mechanical model takes into account the hydrous, thermal, mechano-sorptive and elastic deformations, as well as the changes of wood properties, caused by these processes, e.g. porosity, permeability, stress–strain relation, etc. The mathematical model describing simultaneous unsteady heat and moisture transfer between a gas phase and a solid phase during heat treatment has been developed. The conservation equations for the wood sample are obtained using diffusion equation and the 3-D incompressible Navier–Stokes equations have been solved for the flow field. The constitutive equations are discussed in some detail. ANSYS-CFX10 commercial code was used to solve the hygro-thermal problem and FESh++ for the mechanical behaviour. Experimental results obtained regarding temperature, moisture content and deformation profiles during industrial drying of black spruce wood are compared with the numerical results. Satisfactory agreement is obtained over a range of drying air temperatures.