| 纯钼粉末多孔烧结材料ECAP的数值模拟及实验 |
| |
| 引用本文： | 薛克敏,王晓溪,李萍,王成,张翔. 纯钼粉末多孔烧结材料ECAP的数值模拟及实验[J]. 中国有色金属学报, 2011, 21(1) |
| |
| 作者姓名： | 薛克敏 王晓溪 李萍 王成 张翔 |
| |
| 作者单位： | 合肥工业大学,材料科学与工程学院,合肥,230009 |
| |
| 基金项目： | 国家自然科学基金资助项目，霍英东教育基金资助项目，安徽省优秀青年科技基金资助项目 |
| |
| 摘 要： | 采用DEFORM-3D软件对纯钼粉末多孔烧结材料等径角挤压过程进行单道次三维有限元模拟和实验研究,获得变形过程中试样的应力、应变、致密行为等相关场量变化规律.模拟结果表明:等径角挤压工艺对粉末材料具有强烈的致密效果,整个变形过程可分为3个阶段,即初始变形、过渡变形及稳定变形;试样纵横截面上,等效应变均存在不均匀分布现象,靠近模具内角和上表面处试样所获应变较大,相对密度也较高.试样不同部位所处应力状态及应变速率分布状态的不一致是导致其应变分布不均匀的根本原因.单道次挤压实验结果与模拟结果具有较好的一致性,证明了所建立有限元模型的可靠性.
|
| 关 键 词： | 粉末烧结材料 等径角挤压 数值模拟 显微组织 |
Numerical simulation and experiment of pure molybdenum powder sintered material with porosities during ECAP |
| |
| XUE Ke-min,WANG Xiao-xi,LI Ping,WANG Cheng,ZHANG Xiang. Numerical simulation and experiment of pure molybdenum powder sintered material with porosities during ECAP[J]. The Chinese Journal of Nonferrous Metals, 2011, 21(1) |
| |
| Authors: | XUE Ke-min WANG Xiao-xi LI Ping WANG Cheng ZHANG Xiang |
| |
| Affiliation: | XUE Ke-min,WANG Xiao-xi,LI Ping,WANG Cheng,ZHANG Xiang (School of Materials Science and Engineering,Hefei University of Technology,Hefei 230009,China) |
| |
| Abstract: | Three-dimensional finite element model was used to analyze the deformation behavior of pure molybdenum powder sintered material with porosities during a single pass of equal channel angular pressing(ECAP).The distributions of effective strain,effective stress and relative density of the sample during ECAP processing were obtained.The simulation results indicate that ECAP is an effective technique to densify powder materials and the whole deformation process could be divided into three stages:initial deforma... |
| |
| Keywords: | powder sintered material equal channel angular pressing numerical simulation microstructure |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
