| 直齿圆锥齿轮齿厚及锥顶位置误差检测 |
| |
| 引用本文： | 纪红,黄恺,白国静.直齿圆锥齿轮齿厚及锥顶位置误差检测[J].辽宁工学院学报,2008(3):179-182. |
| |
| 作者姓名： | 纪红 黄恺 白国静 |
| |
| 作者单位： | 辽宁工业大学机械工程与自动化学院 辽宁锦州121001 |
| |
| 摘 要： | 对钢球法测量直齿圆锥齿轮齿厚及锥项位置误差检测进行了研究和探讨。针对大锥角直齿圆锥齿轮和平面齿轮，设计并制作出测量仪，用测量仪调整齿轮齿槽中钢球的径向位置和轴向位置，根据钢球径向位置和轴向位置偏差，VB数据处理确定齿厚偏差和锥项位置偏差。
|
| 关 键 词： | 直齿圆锥齿轮 钢球法 误差检测 齿厚 锥项位置 |
Deviation Measurement of Tooth Thickness and Conical Point of Straight Bevel Gear |
| |
| JI Hong HUANG Kai BAI Guo-jing.Deviation Measurement of Tooth Thickness and Conical Point of Straight Bevel Gear[J].Journal of Liaoning Institute of Technology(Natural Science Edition),2008(3):179-182. |
| |
| Authors: | JI Hong HUANG Kai BAI Guo-jing |
| |
| Affiliation: | (Mechanical Engineering ＆ Automation College, Liaoning University of Technology, Jinzhou 121001, China) |
| |
| Abstract: | Deviation measurement of tooth thickness and conical point of straight bevel gear by using steel bail was studied and approached.Based on big cone angle straight bevel gear and the face gear,a measuring apparatus was designed and manufactured.The axial and radial directions of a steel bail in the tooth space of the measured gear was adjusted,and both the tooth thickness deviation and the conical point deviation were calculated with VB according to the measured results. |
| |
| Keywords: | straight bevel gear steel ball method deviation measurement tooth thickness conical point |
| 本文献已被 CNKI 维普 等数据库收录！ |
