| 弯曲弦杆的圆钢管节点静力性能研究 |
| |
| 引用本文： | 童乐为,王斌,陈茁,陈以一,陈扬骥,林颖儒,林高.弯曲弦杆的圆钢管节点静力性能研究[J].建筑结构学报,2007,28(1):28-34. |
| |
| 作者姓名： | 童乐为 王斌 陈茁 陈以一 陈扬骥 林颖儒 林高 |
| |
| 作者单位： | 同济大学,土木工程学院,上海,200092;新加坡国立大学,土木工程系,新加坡,117576;上海建筑设计研究院有限公司,上海,200041 |
| |
| 摘 要： | 以上海旗忠网球中心钢屋盖工程为背景,探讨了弦杆轴线弯曲的圆管桁架焊接节点的静力性能。进行了空间TT、KT’T、KK和平面K等4种节点形式共9个试件的静力破坏试验。在相同节点形式的条件下,直接比较了弯曲弦杆节点与平直弦杆节点之间在整个受力过程中的性能。应用有限元法进一步分析了弯曲弦杆的曲率半径变化对节点承载力的影响。研究表明,在实际结构工程中广泛应用的弦杆曲率半径范围内,弦杆的弯曲对圆管节点性能没有显著的不利影响。计算弯曲弦杆的圆管节点设计强度时建议采用现有规范中适合平直弦杆的节点公式。
|
| 关 键 词： | 管节点 TT型 KT’T型 KK型 K型 弯曲弦杆 静力试验 有限元分析 |
| 文章编号： | 1000-6869(2007)01-0028-07 |
| 收稿时间： | 2007-02-05 |
| 修稿时间： | 2006年9月1日 |
Static behavior of circular hollow section joints with curved chords |
| |
| TONG Lewei,WANG Bin,CHEN Zhuo,CHEN Yiyi,CHEN Yangji,LIN Yingru,LIN Gao.Static behavior of circular hollow section joints with curved chords[J].Journal of Building Structures,2007,28(1):28-34. |
| |
| Authors: | TONG Lewei WANG Bin CHEN Zhuo CHEN Yiyi CHEN Yangji LIN Yingru LIN Gao |
| |
| Affiliation: | TONG Lewei,WANG Bin,CHEN Zhuo,CHEN Yiyi,CHEN Yangji,LIN Yingru,LIN Gao(.College of Civil Engineering,Tongji University,Shanghai,China,.Department of Civil Engineering,National University of Singapore,Singapore,Singapore,.Shanghai Institute of Architectural Design and Research Co.Ltd,Shanghai,China) |
| |
| Abstract: | Static behaviour of welded trusse joints made of circular hollow sections with curved chord members is discussed in the paper,with the background of steel roof engineering of Shanghai Qizhong Tennis Center.Static tests on nine model joints were carried out,including four types joints such as multiplanar TT,KT'T and KK and uniplanar K.Comparison in behaviour between the joints with curved and straight chords was performed on the condition of the same joint type. The effect of curvature radius of chords on load capacity of the joints was investigated through finite element analysis.Both the experimental and numerical studies indicated that the curvature of chords does not significantly influence the behavior of the joints at a wide range of curvature radii used in practical structural engineering.It is suggested that the design strength of the joints with curved chords can be calculated using the formulas suitable for the joints with straight chords in existing design codes. |
| |
| Keywords: | tubular joint TT type KT'T type KK type K type curved chords static test FE analysis |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
| 点击此处可从《建筑结构学报》浏览原始摘要信息 |
|
点击此处可从《建筑结构学报》下载全文 |
|
