首页 | 本学科首页   官方微博 | 高级检索  
     

高铁含锌烟尘浸出工艺研究
引用本文:周坐东.高铁含锌烟尘浸出工艺研究[J].湖南有色金属,2012(3):35-37.
作者姓名:周坐东
作者单位:湖南有色金属研究院,湖南长沙410015
摘    要:对锌烟尘硫酸浸出提取锌工艺条件进行了研究,分别采用正交试验与单因素试验考察浸出酸浓度、液固比、浸出时间、浸出温度对锌烟尘中锌、铁的浸出率的影响。结果表明:较优浸出工艺条件为硫酸浓度150 g/L、液固比7∶1、浸出时间3 h、浸出温度90℃,在较优浸出条件下,锌浸出率可达95%以上。

关 键 词:锌烟尘  浸出率  湿法冶金

Study on Leaching Process of High-iron Zinc Dust
ZHOU Zuo-dong.Study on Leaching Process of High-iron Zinc Dust[J].Hunan Nonferrous Metals,2012(3):35-37.
Authors:ZHOU Zuo-dong
Affiliation:ZHOU Zuo-dong (Hunan Research Institute of Nonferrous Metals, Changsha 410015, China)
Abstract:The leaching of zinc dust using sulfuric acid as lixivium was studied. The orthogonal experiments and the mono-factor experiments were made to investigate the influence of concentration of sulfuric acid, liquid-to-solid ratio,leaching time, leaching temperature on zinc, iron acid-leaching performance of the zinc dust. The optimal pro- cessing conditions of leaching as follows the concentration of sulfuric acid is 150 g/L,liquid-to-solid ration is 7: 1, leaching temperature is 90℃,leaching time is 3 h. Under these conditions, the leaching percent of zinc is 95%.
Keywords:zinc dust  leaching percent  hydrometallurgical
本文献已被 CNKI 维普 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号