| Abstract: | An in‐line viscometer was designed and constructed to enable determination of the shear stress of plasticised wheat starch during extrusion cooking. The viscometer was installed between the end of the barrel section and the extruder die plate so that the shear stress could be determined for the plasticised material, irrespective of the geometrical shape into which it was subsequently moulded by the extruder die. The extrusion conditions were described in terms of the process parameters, i. e. water content, barrel temperature, screw speed and screw configuration; and of the system parameters, which were the specific mechanical energy input (SME), product temperature (PT) and mean residence time (MRT). The parameters were measured and the results evaluated using statistical methods. Regression equations were used to describe functional relationships between the shear stress and the extrusion conditions on the one hand, and between the shear stress and the product characteristics of the extrudates on the other. The shear stress of plasticised wheat starch determined in‐line can be used to predict the morphological structure (volumetric expansion) and the functional properties (cold paste viscosity and cold water solubility) of extruded, directly expanded starch with a high degree of accuracy. The measurement technique used and the results of the extrusion tests undertaken for this project will therefore enable the shear stress of plasticised material in an extruder to be used as the principle parameter for controlling extruders on‐line. |
