Impacts of impregnation with Timbercare Aqua on the red and yellow color tone of some woods and varnishes

This study has been performed for determining the effects of impregnation with Timbercare Aqua (Tc) on the red and yellow color tone of some woods and varnishes. For this purpose, the test samples prepared from Oriental beech, European oak, Scotch pine, Oriental spruce, and Uludag fir woods, which met the requirements of ASTM D 358, was impregnated with Tc according to ASTM D 1413 and producer's definition. After impregnation, wood surfaces have been coated by Sayerlack parquet varnish (Sp), Sayerlack interior varnish (Si), and Sayerlack exterior varnish (Se) varnishes in accordance with the ASTM D 3023 standards. According to ASTM D 2244, the red and yellow color tone of samples after varnishing process was determined. As a result, the value of red color tone was the highest in Oriental beech (15.21) and the lowest in Uludag fir (5.38). For the wood material, impregnation material, and varnish interaction, the red color tone value was the highest in Oriental beech + Tc + Sp (18.43) and the lowest in Uludag fir + Tc + Si (3.92). The value of the yellow color tone was the highest in pine (34.45) and the lowest in Oriental beech (26.50). For the wood material, impregnation material, and varnish interaction, the yellow color tone value was the highest in Oriental spruce + Tc + Sp (42.12) and the lowest in Oriental beech + Tc + Si (21.47). This effect may be due to the impacts of impregnation chemical on wood extractives and color pigments in varnish. Accordingly, it should be taken into care for applications where the red and yellow color tone value is important. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007