| 快速软模浇注成型用聚氨酯树脂 |
| |
| 引用本文： | 闫春泽,史玉升,杨劲松,黄树槐. 快速软模浇注成型用聚氨酯树脂[J]. 高分子材料科学与工程, 2008, 24(2): 128-131 |
| |
| 作者姓名： | 闫春泽 史玉升 杨劲松 黄树槐 |
| |
| 作者单位： | 华中科技大学材料成形及模具技术国家重点实验室,湖北,武汉,430074;华中科技大学材料成形及模具技术国家重点实验室,湖北,武汉,430074;华中科技大学材料成形及模具技术国家重点实验室,湖北,武汉,430074;华中科技大学材料成形及模具技术国家重点实验室,湖北,武汉,430074 |
| |
| 基金项目： | 国家科技型中小企业创新基金(05C262142011059) |
| |
| 摘 要： | 利用二苯基甲烷二异氰酸酯(MDI)、液化MDI、聚醚多元醇及小分子扩链剂、交联扩链剂,分别采用半预聚物法及一步法合成了两类适用于硅胶模真空浇注成型的二组分聚氨酯(PU)树脂。分析了树脂黏度及釜中寿命。对PU试样进行了差示扫描量热分析(DSC)、热重分析(TGA)及力学性能分析。结果表明,PU树脂两组分及其混合物的黏度较小,釜内寿命适中,浇注性能优良;玻璃化温度在110℃以上,热重损失为5%时的热失重温度在260℃以上;具有较高的力学性能。
|
| 关 键 词： | 快速成形技术 快速模具制造技术 硅胶模具 真空浇注 聚氨酯树脂 |
| 文章编号： | 1000-7555（2008）02-0128-04 |
| 收稿时间： | 2006-09-18 |
| 修稿时间： | 2007-01-22 |
Polyurethane Resin for Silicone Rubber Mold Casting |
| |
| YAN Chun-ze,SHI Yu-sheng,YANG Jing-song,HUANG Shu-huai. Polyurethane Resin for Silicone Rubber Mold Casting[J]. Polymer Materials Science & Engineering, 2008, 24(2): 128-131 |
| |
| Authors: | YAN Chun-ze SHI Yu-sheng YANG Jing-song HUANG Shu-huai |
| |
| Affiliation: | (State Key Laboratory of Material Processing and Die & Mould Technology,Huazhong University of Science and Technology,Wuhan 430074,China) |
| |
| Abstract: | Two types of two components polyurethane resins(PU) for vacuum casting were synthesized by one-step method and quasi-prepolymer method respectively.Viscosity analysis shows that the two types of PU resins have low viscosities at room temperature and appropriate pot lives so that all the gases dissolving in the PU resins can be eliminated completely,and parts without defect can be obtained.The thermal properties were studied by Differential scanning calorimetry(DSC) and thermogravimetry(TGA),the results show that the PU specimens have high thermal stabilities with the glass transition temperatures(Tg) in the range of 115.10 ℃～124.64 ℃ and the initial decomposition temperature(5% mass loss) in the range of 262.86 ℃～277.52 ℃.Mechanical properties testing show that the PU specimens have excellent mechanical properties. |
| |
| Keywords: | rapid prototyping rapid tooling silicone rubber mold vacuum casting polyurethane resin |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
