Numerical Investigation on the Effects of Machining-Induced White Layer during Rolling Contact |
| |
Authors: | A. W. WARREN Y. B. GUO |
| |
Affiliation: | Department of Mechanical Engineering , The University of Alabama , Tuscaloosa , Alabama , USA |
| |
Abstract: | It is well known that a thin phase-transformed white layer can be formed on component surfaces produced by hard machining. However, it is not clear as to how the white layer affects component performance, for example, in rolling contact fatigue. This study aims to determine the effects of white layer and associated residual stress on rolling contact stresses and strains. It is nearly impossible for an experimental study to identify the effects of white layer alone on rolling contact. Furthermore, small-scale contact stresses and strains (less than 30 μm) of the phase-transformed region are difficult to measure using the current experimental techniques. Therefore, a finite element analysis simulation model of rolling contact incorporating machining-induced surface integrity has been developed in this study. Three cases were investigated to decouple the effects of surface integrity factors: surface with white layer only, surface with residual stress only, and surface with white layer and residual stress. The simulation results show that distinct material properties of the white layer significantly influence the magnitudes and distributions of near-surface stresses and strains instead of those in the subsurface. Furthermore, it can be inferred that the white layer would affect near-surface fatigue damage instead of subsurface fatigue damage. The simulated near-surface fatigue damage mechanisms have been substantiated by the fatigue test data. |
| |
Keywords: | White Layer Residual Stress Rolling Contact Fatigue Finite Element Analysis Hard Machining |
|
|