基于组态软件的浮选柱矿浆液位检测控制系统 |
| |
引用本文: | 余龙舟,李世厚.基于组态软件的浮选柱矿浆液位检测控制系统[J].有色金属(选矿部分),2007(5):38-41. |
| |
作者姓名: | 余龙舟 李世厚 |
| |
作者单位: | 昆明理工大学,国土资源工程学院,昆明,650093 |
| |
摘 要: | 选用Kingview6.5组态软件作为平台,并采用矿浆液位和尾矿排矿量串级控制,实现了浮选柱矿浆液位的自动检测及控制。试验结果表明,矿浆液位测量精确,并且系统控制精度在2.5%以内,完全满足选矿工艺对矿浆液位测量和控制的要求。
|
关 键 词: | 组态软件 浮选柱 液位检测及控制 |
文章编号: | 1671-9492(2007)05-0038-04 |
修稿时间: | 2007-06-28 |
FLOTATION COLUMN PULP LIQUID LEVEL EXAMINATION AND CONTROL SYSTEM BASED ON CONFIGURATION SOFTWARE |
| |
Authors: | YU Longzhou LI Shihou |
| |
Affiliation: | Faculty of Land Resource Engineering,Kunming University of Science and Technology, Kunming , 650093, China |
| |
Abstract: | This paper selects the Kingview6.5 configuration software as a platform, it uses pulp liquid level and extracted mine tonnage of tailings cascade control, realized automatic-detection and automatic-control of the flotation column pulp level. Experimental results show that the pulp liquid level measurement is precise, and control precision is in less than 2.5%, and this system fully meet the pulp mineral processing. |
| |
Keywords: | configuration software flotation column liquid level examination and control |
本文献已被 维普 万方数据 等数据库收录! |
| 点击此处可从《有色金属(选矿部分)》浏览原始摘要信息 |
|
点击此处可从《有色金属(选矿部分)》下载全文 |
|