| 基于MoldFlow组合型腔浇注系统的平衡设计 |
| |
| 引用本文： | 宋婷婷,舒大文,何船,邓桥辉.基于MoldFlow组合型腔浇注系统的平衡设计[J].新技术新工艺,2011(5):58-60. |
| |
| 作者姓名： | 宋婷婷 舒大文 何船 邓桥辉 |
| |
| 作者单位： | 昆明理工大学,机电工程学院,云南,昆明,650093 |
| |
| 摘 要： | 为了保证模具的数量与客户产品组装使用量相匹配,打印机中的2种齿轮采取2＋1组合模穴成型。利用MoldFlow软件提供的流道平衡分析模块,优化流程中各段流道的直径,使塑料熔体从主流道进入各型腔的压力保持相等,从而保证了熔体能够同一时间充满3个型腔,实现了3个齿轮的平衡浇注成型。
|
| 关 键 词： | 组合模穴 MoldFlow 流道平衡 优化 |
Design of Runner System Balance for Combined Cavity based on MoldFlow |
| |
| SONG Tingting,SHU Dawen,HE Chuan,DENG Qiaohui.Design of Runner System Balance for Combined Cavity based on MoldFlow[J].New Technology & New Process,2011(5):58-60. |
| |
| Authors: | SONG Tingting SHU Dawen HE Chuan DENG Qiaohui |
| |
| Affiliation: | SONG Tingting,SHU Dawen,HE Chuan,DENG Qiaohui(College of Mechanical and Electrical Engineering,Kunming University of Science and Technology,Kunming 650093,China) |
| |
| Abstract: | In order to ensure the match between number of mold with the using amount of products assembly,two kinds of gears in the printer take 2+1 combination of cavity formation.The application of flow balance analysis based on MoldFlow software in optimizing the diameter of the runner,maintaining the pressure drop from main way to cavity the same and ensuring the melt can be filled with three types at the same time,thus achieving a balance of casting for three gears. |
| |
| Keywords: | Combined cavity MoldFlow Flow balance Optimization |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
