| 基于ADAMS的导杆摇杆滑块冲压机构的优化设计 |
| |
| 引用本文： | 丘世因,吴海涛,刘泓滨.基于ADAMS的导杆摇杆滑块冲压机构的优化设计[J].新技术新工艺,2011(5):42-45. |
| |
| 作者姓名： | 丘世因 吴海涛 刘泓滨 |
| |
| 作者单位： | 昆明理工大学,机电工程学院,云南,昆明,650500 |
| |
| 基金项目： | 教育部第三批高等学校特色专业建设点资助项目 |
| |
| 摘 要： | 为了提高冲压机构的设计质量,缩短和减少设计的周期和成本,针对导杆摇杆滑块冲压机构进行优化设计。通过对导杆摇杆滑块冲压机构工作原理的分析,建立了冲压机构的数学模型并确定了设计变量。利用ADAMS软件对该机构进行了参数化建模和运动仿真,然后以压力角最小和驱动力矩最小为优化目标对机构进行了优化设计,最终确定了影响压力角和驱动力矩的主要设计变量的参数。优化后的结果表明,冲压机构的压力角经过优化后减小了91.5%;驱动力矩减小了53.3%,优化效果明显。
|
| 关 键 词： | 冲压机构 ADAMS 优化设计 |
Optimization Design of Slider Guide Rod Rocker Punch Mechanism based on ADAMS |
| |
| QIU Shiyin,WU Haitao,LIU Hongbin.Optimization Design of Slider Guide Rod Rocker Punch Mechanism based on ADAMS[J].New Technology & New Process,2011(5):42-45. |
| |
| Authors: | QIU Shiyin WU Haitao LIU Hongbin |
| |
| Affiliation: | QIU Shiyin,WU Haitao,LIU Hongbin(Faculty of Mechanical and Electrical Engineering,Kunming University of Science and Technology,Kunming 650500,China) |
| |
| Abstract: | To improve the quality of stamping body design,shorten and reduce the design cycle and cost,optimized the design of slider guide rod rocker punch mechanism.By analyzing the slider guide rod rocker punch mechanism's working theory,not only the mathematical model was established,but also the designing variables were analyzed.The parametric modeling of slider guide rod rocker punch mechanism was constructed by the software ADAMS,and then this punch mechanism was also imitated by ADAMS.The aim of the optimal de... |
| |
| Keywords: | Punch mechanism ADAMS Optimization design |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
