| 高速滚珠丝杠进给驱动系统机械模型的仿真研究 |
| |
| 引用本文： | 吴治明,王均馗.高速滚珠丝杠进给驱动系统机械模型的仿真研究[J].新技术新工艺,2011(7):62-65. |
| |
| 作者姓名： | 吴治明 王均馗 |
| |
| 作者单位： | 1. 陕西国防工业职业技术学院汽车工程学院,陕西,西安,710300
2. 哈尔滨电机厂交直流电机有限责任公司工艺部,黑龙江,哈尔滨,150040 |
| |
| 摘 要： | 建立了高速滚珠丝杠进给系统的机械模型。重点分析了机械系统对整个进给驱动系统的影响,并利用MATLAB进行计算机仿真分析与研究。同时指出在高速加工过程中屈服形变引起的轨迹误差,并通过反复修改参数得到优化结果,从而找出进一步改进的措施。
|
| 关 键 词： | 高速 滚珠丝杠 进给驱动系统 |
The Simulation Model Machinery of High Speed Ball Screw Driving System |
| |
| WU Zhiming,WANG Junkui.The Simulation Model Machinery of High Speed Ball Screw Driving System[J].New Technology & New Process,2011(7):62-65. |
| |
| Authors: | WU Zhiming WANG Junkui |
| |
| Affiliation: | WU Zhiming1,WANG Junkui2(1.Electromechanical Engineering College,Shanxi Institute of Technology,Xi'an 710300,China,2.Technology Department,The Harbin Electromotor Plant AC/DC Motor Co.,Ltd,Harbin 150040,China) |
| |
| Abstract: | This paper established the high speed ball screw feeding system mechanical model.The key to analyze the mechanical system of the whole is driving system influence and by using of MATLAB computer simulation analysis and research,pointed out that in the high speed machining process yield deformation caused by trajectory errors,and through repeated revision parameters optimized results and found out the further improvement measures. |
| |
| Keywords: | High speed Ball screw Driving system |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
