| 聚丙烯釜内釜外成核评价 |
| |
| 引用本文： | 张广平,俞建勇,朱维平.聚丙烯釜内釜外成核评价[J].合成树脂及塑料,2004,21(1):15-17. |
| |
| 作者姓名： | 张广平 俞建勇 朱维平 |
| |
| 作者单位： | 东华大学纺织学院,上海,200051;扬子石油化工股份有限公司研究院,南京,210048 |
| |
| 基金项目： | 中国石油化工股份有限公司资助 |
| |
| 摘 要： | 借助于热分析和力学性能测试考察了釜内与釜外添加成核剂对聚丙烯(PP)结晶行为和力学性能的影响。研究结果表明：2种添加方式对PP结晶温度影响不大，而釜内成核方式能更进一步提高结晶速率，成核PP的弯曲模量、低温抗冲击性能和热变形温度显著提高。
|
| 关 键 词： | 聚丙烯 成核剂 结晶行为 力学性能 |
| 修稿时间： | 2003年4月10日 |
Evaluation on polypropylene nucleated inside or outside reactor |
| |
| Zhang Guangping,Yu Jianyong.Evaluation on polypropylene nucleated inside or outside reactor[J].China Synthetic Resin and Plastics,2004,21(1):15-17. |
| |
| Authors: | Zhang Guangping Yu Jianyong |
| |
| Abstract: | The effects of the nucleating agent added inside and outside the reactor on the crystallization behavior and mechanical properties of polypropylene (PP) were investigated with thermal analysis and mechanical property tests. The results show that the two modes of feeding nucleating agent have a little effect on the crystallization temperature of PP, however, nucleation inside the reactor makes not only the crystallization rate be further raised, but also the flexural modulus, impact strength at low temperature and heat distortion temperature of PP be improved significantly. |
| |
| Keywords: | polypropylene nucleating agent crystallization behavior mechanical property |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
