Department of Mechanical and Automation Engineering, Da-Yeh University, 112, Shan-Jiau Road, Changhua, Taiwan 515, ROC
Abstract:
The iterative learning control (ILC) obtains the unknown information from repeated control operations. Meanwhile, the tracking error from previous stages is used as the correction factor for the next control action. Therefore, the ILC controller can make the system tracking error converge to a small region within a limited number of iterations. This study builds a proportional-valve-controlled pneumatic X–Y table system for performing position tracking control experiments. The experiments involve implementing the ILC controllers and comparing the results. The P-type updating law with delay parameters is used for both the x- and y-axes in the repetitive trajectory tracking control. Experimental results demonstrate that the ILC controller can effectively control the system and track the desired circular trajectory at different speeds. The control parameters are varied to investigate their effects on the ILC convergence.