| 可重构WEDM编控一体化系统设计与开发 |
| |
| 引用本文： | 汪炜,安鲁陵,谷安,刘正埙,朱荻. 可重构WEDM编控一体化系统设计与开发[J]. 电加工与模具, 2003, 0(5): 20-22 |
| |
| 作者姓名： | 汪炜 安鲁陵 谷安 刘正埙 朱荻 |
| |
| 作者单位： | 南京航空航天大学机电工程学院,江苏南京,210016 |
| |
| 基金项目： | 江苏省自然科学基金(BK2000017) |
| |
| 摘 要： | 采用开放式体系结构和组件技术，在Windows平台上，设计开发了可重构电火花线切割加工(WEDM)自动编程系统。基于PC前端和高速I／O平台，结合嵌入式系统、在系统可编程及高效无阻脉冲电源等关键技术，对数控系统进行了可重构设计并加以实现。本研究是对可重构制造模式的有益尝试。
|
| 关 键 词： | 可重构 电火花线切割加工 自动编程 数控系统 嵌入式系统 |
| 修稿时间： | 2003-06-02 |
Design and development of reconfigurable auto-programming and CNC system for WEDM |
| |
| Wang Wei,et al. Design and development of reconfigurable auto-programming and CNC system for WEDM[J]. Electromachining & Mould, 2003, 0(5): 20-22 |
| |
| Authors: | Wang Wei et al |
| |
| Abstract: | Facing the intelligent RMM (Reconfigurable Manufacturing Model) , with OSA (Open System Architecture) and component technology, a reconfigurable auto- programming system for WEDM(Wire-cut Electrical Discharge Machining)is developed on Windows platform. And a numeric control system is also designed and realized reconfigurably, which based on PC and HyperTransport I/O, Embedded System, ISP (In System Programming) and high efficiency non-resistance pulse generator technologies. It is demonstrated that this research is a good try at RMM. |
| |
| Keywords: | reconfigurable WEDM auto-programming NC system |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
