| 高速冲压中硬质合金级进模磨损研究 |
| |
| 引用本文： | 黄珍媛,刘文娟,周驰,阮锋. 高速冲压中硬质合金级进模磨损研究[J]. 模具工业, 2007, 33(1): 71-73 |
| |
| 作者姓名： | 黄珍媛 刘文娟 周驰 阮锋 |
| |
| 作者单位： | 华南理工大学,机械学院,广东,广州,510640;华南理工大学,机械学院,广东,广州,510640;华南理工大学,机械学院,广东,广州,510640;华南理工大学,机械学院,广东,广州,510640 |
| |
| 基金项目： | 粤港关键领域重点突破项目 |
| |
| 摘 要： | 通过高速冲裁试验和金相检测,对比了硬质合金级进模刃口磨损前后的表面形貌、微观结构和Co元素含量百分比的变化,并结合骨架理论和复合增强理论,从微观结构方面解释了Co元素丢失对硬质合金级进模磨损的影响。对于提高精密级进模的寿命和提高电子零件的生产效率具有重要的意义。
|
| 关 键 词： | 硬质合金 级进模 磨损 失钴 |
| 文章编号： | 1001-2168(2007)01-0071-03 |
| 修稿时间： | 2006-07-17 |
Wear of carbide alloy progressive die in high-speed stamping |
| |
| HUANG Zhen-yuan,LIU Wen-juan,ZHOU Chi,RUAN Feng. Wear of carbide alloy progressive die in high-speed stamping[J]. Die & Mould Industry, 2007, 33(1): 71-73 |
| |
| Authors: | HUANG Zhen-yuan LIU Wen-juan ZHOU Chi RUAN Feng |
| |
| Affiliation: | School of Mechanical Engineering, South China University of Technology, Guangzhou, Guangdong 510640, China |
| |
| Abstract: | The surface topography,microstructure and percentage variation of Cocontent before and after the wear of a carbide alloy progressive die were compared through the high-speed blanking and metallurgical phase detecting experiment. The effects of Co loss on the wear of carbide alloy progressive die were explained from the aspects of microstructure,framework theory and composite reinforcement theory. |
| |
| Keywords: | carbide alloy progressive die wear Co loss |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
