Modeling and Numerical Simulation of Clays Cracking During Drying

During drying or desiccation of clay-type materials, some stresses appear. Usually they are compressional inside of the material and tensional close to the surface. If the tensional stresses exceed the material strength, the clay cracks. This article is devoted to the modeling and numerical simulation of this phenomenon. The proposed model consists of two parts. The mass transfer is described by a simple diffusion equation together with convective boundary conditions. In the mechanical part it is assumed that the clay is composed of small particles linked together by cohesive forces. These forces are described with the use of mesh models. Two models are proposed: elastic (mesh consists of springs) and viscoelastic one (mesh consists of Maxwell elements). Four types of clays were tested experimentally to obtain the model parameters. The tested materials were selected with respect to different mineralogical compositions that determine the water-bonding ability. Simulations of the convective drying of bricks made of these clays were performed. It was shown that the degree of cracking depends on the quartz content of the clay. The obtained results were compared with experimental ones and good agreement between simulations and experiment was obtained. Additionally, the inner forces caused by drying are analyzed and discussed in this work.