首页 | 本学科首页   官方微博 | 高级检索  
     

Ti6Al4V钛合金表面蓝色微弧氧化膜的制备及性能
引用本文:闫秀侠,于海青. Ti6Al4V钛合金表面蓝色微弧氧化膜的制备及性能[J]. 电镀与环保, 2020, 0(2): 43-45
作者姓名:闫秀侠  于海青
作者单位:烟台工程职业技术学院
基金项目:烟台市科技发展计划项目(2014GX037).
摘    要:利用微弧氧化技术在Ti6Al4V钛合金表面制备出蓝色微弧氧化膜。对微弧氧化膜的微观形貌和元素组成进行了分析,并对微弧氧化膜的显微硬度进行了测试。结果表明:微弧氧化膜表面光整,呈均匀深蓝色,其主要由Ti、Mn、O和C四种元素组成,还含有少量的V、Al和Si元素;微弧氧化膜的表面粗糙度约为0.159μm,与钛合金的表面粗糙度相近;微弧氧化膜的显微硬度为5 437.4 MPa,显著高于钛合金的显微硬度。

关 键 词:蓝色微弧氧化膜  Ti6Al4V钛合金  宏观形貌  微观形貌  元素组成  显微硬度

Preparation and Properties of Blue Micro-arc Oxide Film on Ti6Al4V Titanium Alloy
YAN Xiuxia,YU Haiqing. Preparation and Properties of Blue Micro-arc Oxide Film on Ti6Al4V Titanium Alloy[J]. Electroplating & Pollution Control, 2020, 0(2): 43-45
Authors:YAN Xiuxia  YU Haiqing
Affiliation:(Yantai Engineering&Technology College,Yantai 264006,China)
Abstract:Blue micro-arc oxide film was prepared on the surface of Ti6Al4V titanium alloy by micro-arc oxidation technique. The micro-structure and element composition of micro-arc oxide film were analyzed, and the micro-hardness of micro-arc oxide film was measured. The results showed that the micro-arc oxide film has a smooth surface with dark blue color, and it was mainly composed of Ti, Mn, O, C and a small amount of V, Al and Si. The surface roughness of micro-arc oxide film was about 0.159 μm, which was similar to that of titanium alloy. The micro-hardness of micro-arc oxide film was 5 437.4 MPa, which was significantly higher than that of titanium alloy.
Keywords:blue micro-arc oxide film  Ti6Al4V titanium alloy  macro-morphology  micro morphology  elementcomposition  micro-hardness
本文献已被 CNKI 维普 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号