| NWC—Ni纳米涂层的制备方法研究 |
| |
| 引用本文： | 王飚,王宇栋,张自华,杨尚平.NWC—Ni纳米涂层的制备方法研究[J].纳米科技,2009,6(4):60-64. |
| |
| 作者姓名： | 王飚 王宇栋 张自华 杨尚平 |
| |
| 作者单位： | 昆明理工大学机电工程学院,云南昆明650051 |
| |
| 基金项目： | 国家自然科学基金项目（50371033） |
| |
| 摘 要： | 分别用等离子喷焊法（PTS）、冷喷涂法（cs）和复合电镀法（NCP）在2Cr13不锈钢母材上制备了nWC—Ni纳米涂层，并对涂层进行了XRD分析和抗磨蚀性能测试，结果表明，CS法的涂层因与母材未达到完全冶金结合，所以不具备优良抗磨蚀性能。PTS法和NCP法所获得的涂层均能与母材牢固结合，具有优良的抗磨蚀性能，但因在PTS法过程中存在涂层质量的衰变现像，故其涂层性能仍不如NCP优。
|
| 关 键 词： | nWC—Ni涂层 等离子 冷喷涂 复合电镀 |
Research on Preparing Technique of NWC-Ni Nano-coating |
| |
| Authors: | WANG Biao WANG Yu-dong ZHANG Zi-hua YANG Shang-ping |
| |
| Affiliation: | (Mechanical School of Kunming University of Science and Poly-technology, kunmin 650051, China) |
| |
| Abstract: | NWC-Ni Nano-coatings were prepared by plasma thermal spray （PTS）, cold spray （CS） and nano-composite plating （nCP）, respectively. XRD analysis and wear-resistance tests of the coatings were carried out. Experimental results indicate that the CS coating did not show better resistance because the coating was not complete metallurgy combine, while PTS coating and nCP coating showed better wear-resistances. Furthemore, the wear-resistance of PTS coating was lightly weaker than CP coating because of the degeneration during thermal spray process. |
| |
| Keywords: | nWC-Ni Coating Plasma Thermal Spray Cold Spray Composite Plating |
| 本文献已被 维普 等数据库收录！ |
|
